lbohn

About

Username
lbohn
Joined
Visits
0
Last Active
Roles
Registered User

Comments

  • You could also patch two Desk Channels in place of the 2Ch Smoke Machine and record those channels to the appropriate masters. --L.
  • Thanks for the reply. I wasn't clear in my initial reply: I apologize. My suggestion was to add a *new* Q93 with only the channels/fixture requiring marking set to 0% intensity. Your "old" Q93 becomes Q93.2 (or Q93.5, etc) and is auto-followed …
  • I'm unclear on your scenario. Sitting in Q91 your DSM called Q92 and then called Q93 early. Because Q93 was called early (before Q92 had a chance to complete), some fixtures hadn't faded out and therefore hadn't marked properly. Is this correct? …
  • Split the cue. Using your scenario -- write a new first cue (Q101) containing only 0% intensity for the fixtures requiring marking. This is the called cue. The second cue (Q101.2) is your original cue now auto-following (or Follow + 1, etc) t…
  • Jeff, Happy to help and glad you found a solution that works for you. I agree adding syntax along the lines of "GOTO LIST 3/2" or "GOTO LIST 3 CUE 2" would be a useful feature. --L.
  • Jeff, Ah, I see ... you wouldn't need the GOTO then. SCENE 3 ENTER will fire scene 3 on a virtual master. --L.
  • Jeff, Scenes can only store one cue so that syntax wouldn't work. You could substitute a Scene for the List in my workaround, however. --L.
  • Jeff, Here's a possible workaround ... 1) Record the keystroke macro minus the Goto bits, Macro 1. 2) Record an empty cue into a new list, List 101. 3) Set the Macro in List 101 Cue 1 to fire both your keystroke macro (GK1) and your specifie…
  • Alex, Try disabling all but one of the network adapters on the Mac. If that doesn't work, disable ALL your adapters, launch H3/4PC, re-enable one network adapter with H3/4PC running and start a show. There seems to be an issue where H3/4PC can…
  • Jeff, Thanks for the suggestion. I've returned to creating cuelists with comment macros to recall the view and storing that to the function key. I was looking for a more elegant solution. Upon reading that views could be stored directly to a …
  • You should be able to call up the keyboard by hitting SET twice. --L.
  • I've been seeing the same error a lot. Haven't been able to come up with a workaround outside of deleting the cue and rebuilding to record with correct cue number. --L.
  • swolf wrote: » - Encoder buttons doesn't work anymore!!! Setup > Preferences > Programming > Encoder Wheel Button Option to Cycle Feature Mode. v1.2.0 added this option and defaulted it to "Fine Mode". --L.
  • Michael, Thanks for the reply. Interestingly, I can create a cuelist with a comment macro that recalls the same view, place it on a Function Key and it will not release selected fixtures when pressed. It is only Function Keys with views saved…
  • Marty Postma wrote: » Check the power saving settings on the ethernet port for your PC. That setting is disabled. (AIO is not allowed to power off port for "energy savings".) MLorenz wrote: » Is this also happening on the Roadhog or only the H…
  • After an hour or so of uptime... Disconnect Ethernet cable Link State: Disconnected ArtNet stops and all fixtures show DMX loss. Reconnect Ethernet cable Link State: Up ArtNet broadcast has not resumed; all fixtures show DMX loss. …
  • Have you ensured that "Run Server" is enabled in Settings on the Hog4PC before connecting to the RoadHog? --L.
  • Thanks for OTd1/1 in v1.2.0. Perfect! --L.
  • Most likely my faulty memory, but I thought someone reproduced the bug on a console after it was initially reported. Personally I have reproduced this bug on 3 Windows 8 Hog4PC installs - 1 desktop w/ Nano wing, 1 laptop and 1 tablet. All 3 have…
  • No. But that's a Hog4 bug and not tied to specific hardware. It was first noticed on a tablet but is reproducible on any Hog console. --L.
  • You might be interested in my post here:
  • I'm using this:
  • Michael, Thank you! That is fantastic news. And a big thank you to Chris! --L.
  • Chris, Thanks for the quick reply! I appreciate the extra effort in getting this rolled into a future update. --L.
  • Michael, Thanks. I will look for a workaround I can implement before I leave the project. --L.
  • Michael, Thanks for the reply Any chance I might be able to get a beta build with this feature enabled ahead of the next general release? The project I am currently working on opens in 10 days and I'd like to have the TC toolbar controlled by …
  • MLorenz wrote: » You can try MIDIOX Blast from the past! I probably still have the Win9x version I used years ago on a CD-ROM somewhere. --L.
  • MLorenz wrote: » Is any other application seeing the Midisport? Is it found in the hardware-settings of the computer? Yes the MIDISPORT is seen in Device Manager. I'd have to see if there is another MIDI capable program installed or find a stan…
  • MLorenz wrote: » Jump after frames should not be set to 0.... I think it shouldn´t be possible to enter 0 anymore... Because jump after 0 would mean that you jump as soon as timecode is present.... We had this thing happen some weeks ago.... And…
  • I use RemoteRDP
  • timbotrog, If you are comfortable editing your registry (and understand the consequences of making a mistake), I recommend quinn's suggestion in post #2:
  • 1) Open the Hog context menu: right click on the command line in the Hog window. 2) Click "Toggle Front Panel". If necessary: 3) Open the Hog context menu as above. 4) Click "Workspaces >". 5) Select "FrontPanel", "Programmer" or "…