Hugovd89

About

Username
Hugovd89
Joined
Visits
32
Last Active
Roles
Registered User

Comments

  • mikeyray wrote: » but there is no way of running H4 on a roadhog3 I take this challenge, all I need is a NanoHog:D
  • mikevers wrote: » Is this a general recommendation for using touch screens with the new Hog 4 family? I would like to use Dell S2240T now, because it supports multi touch. This screen is generically supported by Windows 7 and 8, but does that mea…
  • Forget my previous post. I saw the manual "white only under rgbw mode" but you want cmy mode + white. I inverted the cmy channels on this fixture profile so if you setup your unit in rgbw mode the cmy collours should work, and white should wor…
  • Hello Tim Is this what to you want I added RGBW to the DLS M1 CMY profile. You have to merge the fixture profile in your show to use it.
  • I think it has something to do with ports being blocked (firewall)
  • Michael_Graham wrote: » 1. Are you launching the show in Nano or Full mode on 4PC? 2. Are you using a touchscreen or using the mouse? 3. Are you turning the encoder slow and it is getting stuck on a value? 4. When logging off a show we pu…
  • besides "go on flash" and "release on off" setting the cuelist to "IPCB Crossfader" should have the same effect.
  • That's it then, I have a HogPC setup shouldn't wings (original hardware) unlock this feature?? Any good templates for the encoder,faderless users??
  • It should be possible, i´ve used it the same way to have 1 quelist trigger a macro to set another quelist to chase mode. Downside is when screensize change these macro´s become useless. And have to be updated.
  • Sounds like your fixture profile is RGB+Dimmer, and your led fixtures are on RGB (3ch) mode.
  • Why not use 2 masters 1 with your standard (colour) cue's and 1 with your strobe cue's. set the standard cuelist to "persist on override" and your strobe cuelist to "IPCB" and give it a higher priority. I'm not sure if this is what your w…
  • Mitch wrote: » Are you using a Wing to play the cues from, what are you tapping? If you are using a Playback Wing for example, as a test you can try moving the cuelist to a different fader and see if the problem continues. There may be a problem i…
  • Have had the same problem on the ipc when I changed pan/tilt of 100 heads the server crashed due to the load, especially when I did fast changes with the track ball. With 50 heads there was a noticeable lag but 100 heads was just to much for the …
  • nibor wrote: » I am sure it will be like the MA2 it will have 20 faders Faster,SSD a lot of bits to buy yup It will be a big plasitc black thing. and it will be called the HOG..... It will be stable, futureproof, no motorized faders and thus m…
    in ? Comment by Hugovd89 May 2012
  • SanderL wrote: » Been using the virtual cuelists last weekend, and worked great! Only 1 thing... When i have movements for my moving heads via a virtual cuelist, how do i easily adjust the speed of the movement? Touch and hold the virtual cueli…
  • It is only possible with cuelists, scenes dont have these options. Would it be possible to have scenes that don't latch? Cuelist > playback options > Auto-release at end Also scenes that unlatch on a second press would be nice? Cue…
  • SanderL wrote: » With the virtual cuelists, how do you operate it? When i`m having a list with something i wanna tap manually thru, can i do that also with the virtual cuelist. And that with normal buttons instead of tapping on the touchscreen (wh…
  • For 3 You could try to use a "Mark-off" effect on the colourwheel, Chose a correct size at which the colour wheel goes back 1 step at every colour. And then try to get the effect stuck (paused) at that value by using the speed and length param…
  • For live busking this would defantly be a big + Also a function to set your palletes to execute immediatly without selecting a group first. (excuted to the all fixtures within the pallete, or when global to all fixtures) and put them directly int…
  • cormacjack wrote: » Hi, I'm using Build 3.2.2 and a few fixtures i'm using have the incorrect default parameters,colour wheel,gobo. I've seen this mentioned in a few threads already where CTO seems to be defaulting instead of open. Was this fi…
  • I recently did a fixture request for the Showtec Beam 300, that was 4 days before the show. I got the lib after just 2 days :headbang: The only reason why I requested this file becaus, I wasn´t the main operator during the show only did the progr…
  • c_muenchow wrote: » Hugo, Basically you are saying that the BPM being recorded is not consistent with the tapping you are doing? Yes, although the first double tap is ok, the second double tap makes it sky rocket to +400bpm. I always do a…
  • SanderL wrote: » Not 100% sure, but it looks like it is the same fixture as the Showtec Expression 33000 zoom. There is a personality for that fixture. Just checked its the same fixture.
  • Perhaps this is good enough for the time being. Everything except the macro's is included. Advanced profile
  • jxgriffi wrote: » When I get in today I'll give this a try. I'm running a current show and have VL2000's in my rig. It was working fine for me the other day, but I was trying LED's and not the VL's. Its not fixture related, it happens with …
  • matt8445 wrote: » So greater question that is something I didn't potentially realize then. When I record a group does it store information as to what order fixtures were selected in the programmer? So in this scenario if I select 201-210 then 31…
  • Marty Postma wrote: » Was this show created in a recent build? Or is it an old showfile? If it is older, one thing you might try is launch a new "blank" show in v3.2.3 and Merge in all of your old show to be sure you are running the latest fix…
  • Marty Postma wrote: » Does your Group contain different fixture types? Out of curiosity, I just tried this on a new show on H3PC with 10 VL 2k Spots with no trouble making Global FX palettes. No all of the same type, I tried diffrent sort of f…
  • c_muenchow wrote: » Jon is correct on this one. Global Effect palettes can be created but it requires that your programmer contain effect values that are consistent across all fixtures which means items like fanned offsets and different rates per …
  • stephlight wrote: » I think that, at this time, you can only record effect per fixture. If you want to apply an effect from a fixture to an other one you must do a copy. Hope this help So its not possible to create global effect palletes …
  • MLorenz wrote: » You could record a keystroke-macro for this Still not as efficient, would still have to excute the macro per list.
  • c_muenchow wrote: » Colin, Thanks for your post. The fact of the matter is the current issue on 3.2.X with the iPC is that our re-arc of wheel messages in 3.2.0 did put some extra stress on CPU processing whereby the desktop process can take CP…
  • Hello Michael Thanks for testing this issue, I'm indeed running 3.2.2 havent had the possibility yet to update to 3.2.3 on my main console. Tested it on my home setup it seems that it works in 3.2.3 although I tested with a mouse no touchscree…
  • LDEvanB wrote: » remember tho, an IPC is basically a tower PC with a built in DP8000, in a custom case, with a front panel. With that said, the IPC supports an array of hardware options that are used in the computer industry (primarily the mainboa…
  • spistaccio wrote: » In case I don't- how do you suggest the best way to block the Mover/conventional cuelist without blocking the media fixtures from the other cuelist? Just touch all the non-media channels and re-record the cue? Why not just g…
  • Would be great if we could simply use the scroll wheel of a mouse as encoder. Just select which of the 4 encoders you want and scroll to your desired value.
  • ShrunkenNed wrote: » If you just want failover (console backup) put both on the same network, different net numbers and 'run server' on both. If you want full tracking (chosen page, chosen master, playback state), put both on same network, and …
  • Awesome idea It looks so unprofessional when you start programming and all spots go nuts. Or when busking on the fly, making a effect during the show. 10 or 0 would be a whole lot better:D
  • Gordo wrote: » With the "Guard" enabled, press the list/scene, then "OPEN" then press "OPTIONS" I always press and hold open touch the list/scene and then options. but this is a long process with many cuelists, so i would like to know if the…
  • Thats becaus cue1 (full blind) is tracking through on your effects cue. In playback options you can set your cuelist to cue only, this will turn off tracking.
  • Yes indeed very fast update, :headbang: Time to try V3.21 and hopefully get at the good things from 3.20, and the stability of 3.19 Keep the features coming
  • Havent used the syntax either since v3.18, also I think I made a mistake in how to apply the syntax to the cuelist. I believe I pressed the desired cuelist and hold it when applying the syntax and then release the cuelist. Will give it a try agai…
  • c_muenchow wrote: » Now there a few optimizations you can try to make it more likely to have your wireless setup succeed in 3.2.0. First, double check that all computers have their Windows firewall turned off (not just exceptions), disable any un-…
  • Also now when i try to launch a show on the tablet its say "hogclock init failure" after that it says The show server is not responding would you like to wait. If I press no the Hog3PC stops responding Also the notebook is having hogclock init fa…
  • srautane wrote: » Btw, does this really work? Well, if not I would probably use scenes and scene # thru # time # as macros. In 3.18 it worked, havent tried 3.2 yet in live conditions. didnt know you could time scenes like that
  • Andreas wrote: » ah, thats why you should read the release notes:p 3.2 has a new :rtfm:
  • srautane wrote: » Just a tought... You can have macros like goto time 1, goto time 2, etc. Press a macro and then the list. Yep good one
  • Or when using cue´s for positions (multiple cue's in 1 list) goto "cue number" time 10 (goto 1 time 10) and for single cue, cuelists its goto time 10 and press the cuelist (on the touchscreen)