paulvanpanther
About
- Username
- paulvanpanther
- Joined
- Visits
- 283
- Last Active
- Roles
- Registered User, Hog Beta
Comments
-
It was the fixture Software. now we are using 1.4.4.
-
Hi, something is brocken with the Fixture libary in this Version. I tested the last 2 days some SolaPix 19 with the v3.13.0 Verion without no problem. today i changed with an clean Instal on our Hog 4 to v3.14 and patched our stage for an Concert…
-
I have tested it again with the 3.14 and nothing changed to this problem. can someone please also check this. Its easy to reproduce with the sACN Viewer. just patch one P18 from JB Lighting in Mode 2 and see if all 62 Channels are sent. thx
-
6 Month later... I do not know if this bug is fixed in the upcomming 1.14. I can not test it with one of our Hog´s. For me the best work around is to patch one channel at the end of the DMX line. Or after the last Fixture. The problem here is…
-
any news? were you able to recreate the problem? PS: Please set me as an Hog beta member. ;-) THX
-
Ive Patched one JB P18 on sACN 7 see Image: https://we.tl/t-rd2SPKrZZ0 Its the same as bevore only 61 channels...
-
I will try it tomorrow. I am at Home for today.
-
Ive made one last test for today. Hog4 direct into ENTTEC MK3 set to sACN DMX line 7+8 Patch one JB P18 Mode 2 @ 8/1 sACN changes only turned on an off with an restart in between. Same result: Channels received 61 on the 8th Universe. The P18 uses…
-
yes it makes no diverence wenn turned off...
-
Hope this helps. I think its always the last fixture (JB P18 Mode2) on each DMX line thats not working. Testet also with an new show. Hog 4 version 3.13.0 no Wings or external Monitor´s.
-
I did get an wrong information about the VL 3500. It was also an P18 but on an differnt DMX line. today ive got some time and testet some things. I used an Swisson XMT 350 to read the timings. first Test: Hog 4 into ENTTEC MK3 set to sACN DMX line…
-
I have the same problem. We changet our nodes (ENTTEC MK3) to sACN mode. There was no problem with an ION or Gio. Now we are using our Hog 4. everything is ok exept the output stops at around 300. Ive testet the same adress on an different Fixture …
-
Hello, second bug: are you changing the passcode in the correct line? Maybe you are in the setting of the DP8000?
-
Ive updated to the newest firmware. The big art-Net delay is gone. The flickering is still there. with sACN and art-Net. even wenn i set the refreshrate at max. So its still not to use for me. testet everything with different setting an setups. Hog…
-
Hello, There is still an flickering in sACN mode. The workaround does not work for me.
-
All 4 are new. with the latest Firmware. V1.4
-
didn´t reboot between switching. I am in an Theater, unmanaged switches are only to boost the signal. Hog 4 > switch > switch > switch + 2x Entec DMX 5 to 8 > switch > 2x Entec DMX 1 to 4 There are so many switches to cover all pos…
-
Yes 1>8. tried it with uni and broadcast. SACN in disabeld. refresh is 40 I thinks its not the node. the same setup works fine with an Gio. Had both consoles next to each other.
-
Hello, I have exactly the same Problem. Also using 4 Entec MK3´s HOG 4 Software Version 3.10.0 DMX 1 to 3 works fine. Delay from DMX Line 4 to 8 It works fine with an ETC Gio.
-
Hi, set the Lamp Power to 100%. it´s Idle on 50%. The Library is ok.
-
Hi, fpdriver-win32-golden.exe or launcher-win32-golden.exe
-
un-park = pig+park :rtfm:
-
Hi, see here: http://forums.highend.com/showthread.php?t=11968 only way to fix this bug: downgrade to 3.1.9 Robert
-
ok will try to upload the show tommorow. just four info: no problems with an external screen without touch. Conectet via DVI to VGA sometimes problems with an external elo toch. Connectet via DVI to VGA (reboot fixes the problem) will also …
-
thank you billy, will try the bios settings on monday. @chris: what is the average temerature of the cpu? we are using an external power supply. this means there are 1 fan less in the desk. reduces the noise level heavily. other problems:…
-
Hey Chris, Tested it with all windows closed, still the same lag like in the video. An other bug i have seen is i can not move my Scene window from the externel Monitor. (ELO). It moved the Group window every Time. Reboot fix it sometimes. T…
-
Ok, I try to get the same setup running ASAP. I think i can try it at Saturday or Sunday again. On Screen: Color Picker, DMX and Output window was lagy. Programmer window didn´t show any lags. Also the Grafiks are with no AA. (hard edges, no s…
-
Ok, I disabelt all sACN and Art-net outputs. No changes at all. Tryed the same setting with an superwidget and the DMX is still laggy. I made a video for you to see what i see. Setup is 6x JB A7 standart RGB 8 Hog IPC with external Monitor no To…