caffeinefree
About
- Username
- caffeinefree
- Joined
- Visits
- 0
- Last Active
- Roles
- Registered User
Comments
-
Also to add: we have a ELO touchscreen and USB to VGA hooked up to the hog.
-
Hi Chris, Just wanted to let you know that the Playback crash is back but only once or twice a night not all the time like before. Hope you found something in the .exe files I sent you. If there is anything I can send you please let me know. Tha…
-
Hi Chris, Disabling all the art-net and sACN outputs worked! It also stopped the "ghosting" problem and the the console itself is much snappier. Feels like new. I am also transferring the log to you as I type. Hopefully it will shed some light on …
-
Thanks Chris for the back story on the iogear device . I understand the dilemma. Can you explain in a little more detail how I can get my system to boot up / lamp on / and run a cuelist or two with this external monitor attached yet not setup. Wou…
-
Just finished cleaning the faders. You're right Eric. Like new again. Thanks for the tip. Dave
-
Hi Robert, Thanks for the info. Please keep me up to date with your purchase and how it turns out. Dave
-
Thanks Eric. I'll try to clean them. If all else fails I will order a couple with the part number 90405330EF. Once again, thank you. Dave
-
Thanks Sami. I'll see if anyone else chimes in.
-
Thanks for the tip Jon. Lightbroker.com seems to have a few. Have you or has anyone ever made a purchase from them. I'm in BC so a west coast US store is a plus. Thanks again.
-
Also the: 1515L, 15" LCD Flat Panel Touchmonitor, ACCUTOUCH FIVE-WIRE RESISTIVE, Dual Serial/USB Interfaces. Includes US power supply, interface and video cables. Color: DARK GRAY, E210772 or 1515L, 15" LCD Flat Panel Touchmonitor, INTELLIT…
-
I was looking at either of these models: ELO 1915L 19IN Accutouch Desktop LCD Touchscreen Monitor Dual Serial USB 1280X1024 VGA ELO 1519L 15IN LCD IntelliTouch Serial / USB Dark Grey What are the spec I need to stay in? Ie. L series for instanc…
-
Follow up... So it seems to be fixed! Since the Image update and the software update plus moving the usb ports around all is good. I'll post once more after the second week for safe measure. Thank you all for your help. Merry Christmas and Happy H…
-
Both. All info in the DMX window feezes and the fixtures stop aswell as opto-spilter LEDs goes dead.
-
Latest.... So my team and I ran the Hog with the case open and wiggles the usb cable that links the motherboard to the DMX board. Nothing happened. Once we unpluged the usb cable it gave us the same symptoms as when it did during a show. Also no…
-
HI Mitch, That was the first thing we tried. Though it fixed it yet it's back. The usb from the DMX board to the motherboard was in but does sit alittle loose on the motherboard end. Can I use a different USB connection (there is one above it) or a…
-
p.s. Chris I did not receive your email. I checked my info and the address is correct. I will email you my email address.
-
Hi All, I am going to upgrade the XPe image 1.6.0 tomorrow and see if that helps. Since the DMX error the following show all was ok and the weekend shows went good, no problems. Tonight it showed it's ugly head again. The only common thing we ca…
-
Well that's easy. It's always the obvious solution I overlook. Thank you very much for the quick response.
-
Thank you for the heads up and one question. What is "busking"?