MarcS

About

Username
MarcS
Joined
Visits
1
Last Active
Roles
Registered User

Comments

  • ah ok..Danke Marc...
  • MLorenz wrote: » This is correct, if you use a software from 2.x.x on If you would like to use H3 and H4 at the same time you must use 3.2.6 for HOG 3 and a 1.x.x. version of HOG4 Hi Marc, just for understanding, i am not running Hog3PC a…
  • Thanks Marty, in this config, the iPC hands out the IP, i had it before all set to 172.31...(this was perfect with 3.1.9 ) ...i still have in all my trials with different IP configs dropouts...i mean, the Console and HogPC always connect, but after…
  • in the last config the router was in bridge mode. as a dhcp server the ip is 169.254...... and i did the config with this range for for hogpc and ipc. do you think its the address range of 172.31.... which is in conflict with airport? standard c…
  • Thanks Chris file is on the way –––––––––––––––––––– last try holds about 15 minutes before HogPC went down (without any action) 3PC> Boot Server only, Custom IP 172.31.0.2 iPC> Boot Server only, Custom IP 172.31.0.1 as much as i re…
  • Hello Chris, 1) i tried a second Airport Express (same Model) today, i try another Wifi Router (Speedport) Hog PC is running on MacBook Pro Bootcamp Win XP Pro SP2 2) i tried different conigurations..WDS and iPC serve DHCP, at the moment both …
  • I have reinstalled Hog3PC and also the Airport Express and did all the configurations new. The connection still does not work proper at Wifi. It seems that there are short dropouts so that the RFU lost the server "Console has restarted since the…
  • i connected iPC 3.2. and Hog3PC 3.2. as i usually did all the time before 3.2 HogPC as RFU ...it takes much longer to connect to iPC Show, but i can launch...after a while (different, some minutes ) and some button action Hog3PC crashes, in Networ…
  • bradpepe wrote: » >> In the mean time, you can still use a tablet PC running Hog 3PC as a remote. thank you for your patience, Sure, i run Hog3 PC via Wlan but there is a difference to carry a Laptop or iPad focusing 2 Hrs....and Encod…
  • thanks marty, so i will use a dmx to artnet converter. marc
  • Marty Postma wrote: » I assume when you mention "ethernet" you are asking about ArtNet. The only way to have ArtNet with an iPC is to add a DP-8000 to your system. Hope this helps. thanks marty, i was a bit confused, becouse hogpc softw…
  • stephlight wrote: » Something Like that:
  • I would love to see as soon as possible a iPhone Remote App!