bsbjuicer

About

Username
bsbjuicer
Joined
Visits
102
Last Active
Roles
Registered User

Comments

  • "Not far away" means at least a year away....
  • Crickets....
  • Sold, sorry
  • I, for one, am ok with change type not working if it allows me to build a new fixture that someone throws at me at the last minute, "To test," instead of having to run it as desk channels and a cheat sheet.
  • I have been testing v3.3 for a couple days in parallel with v3.2. It feels like v3.3 has a better time with its networking issues. I still see errors happening in the log, but mostly a "time warp" issue that says the clocks are milliseconds apart be…
  • We are usually running 4 stages simultaneously (at one point 6 stages), and sometimes 24 hours a day. The rigging crew has a Roadhog4 as an interface. The 2nd unit uses a RoadHog4 for its unit. I use a Full Size Hog4 and small remote laptop for 1st …
  • We were having a lot of errors with wifi remotes. As other wifi devices (such as 5GHz WiFi video transmitters/receivers) would power up, my network would send an error down the line and lock up the main show server. We are usually running a laptop H…
  • I have had the same thing happen to me on v2.2 with single console (with client tablet). When I had DP8000's networked in I had to reboot the system to get control back. When outputting DMX from onboard DP I could pig-open-backspace and kill playbac…
  • Had the same issues in the Hog3. Usually had to boost the TC signal for the widget/board to respond. Bryan
  • Hi Jeff, I once had a PoE injector go bad (that was powering a wireless AP). The main show was fine, but any effects I ran were jumpy and jittery. It seemed to mess with the timing of the console (or at least the DMX output timing). The AP was in…
  • Go to the settings of the console in the network window. It should be there under the security tab. Bryan
  • If, like me, your laptop doesn't have a pause/break button anymore, a quick fix is to click on the windows start button and type osk and hit enter. This will bring up the on screen keyboard which has a pause button on it. Bryan
  • The red button on top.
  • Hi Mitch, DHCP off on the console, I use the router for all that. During startup I power on the router first and make sure it is fully active, then start the RHFB. The only DP on the system is the internal one. Two pieces of hardware, one cable. Af…
  • Been through that. If I use a switch it is unmanaged. Have used various cables. The router is set up to reserve an IP address for the board. Bryan
  • Hi Eric, RHFB direct connected to router. No lights on the Hognet output on the first startup, as well as IP address setting itself to the loopback address instead of the static IP address I gave it. Gigabit router. Nothing else directly connected.…
  • My only guess is that the client loses contact with one process of the main server and the message is only displayed on that client. That client can't find the main server or a parallel server (for a moment) and "croaks". I would wish that the softw…
  • Hi Scott, I get that message every so often too. Usually when the tablet (as a client) has lost the WiFi signal either by being to far away from the access point or from being overpowered by another source. (stedi-cam, wireless monitors, etc) And I…
  • Started the show on 3.1.7 in March, so I'm still on it. REALLY want to make the move to 3.2 but we flip from stage to stage and have a bunch of 1st unit/2nd unit crossover with show files. 3.1.7 has been rock solid. I'll make the move when this ends…
  • Hi Scott, I have a DP8000 running in the perms for a set I am on now. Don't know the core temps, but the perms hit 120F on Friday. 110 spacelights in a small stage will do that. No problems! Works great! Bryan
  • I have to say thanks! to ericthegeek, I have been running 3.1.5 for a few weeks now without a crash. Granted, the current show I am working on doesn't make as many changes as the the last one. But I am constantly logged in running the show remote vi…
  • Hi Richard, Sorry to hear about the crashes, glad to hear you survived the rest of the show. I upgraded to 3.1.5 once I got to Louisiana and haven't had a problem yet. I have been patching and repatching for three different stages, used the fixture…
  • Thanks Scott, I may try that tomorrow, too late for today. I'm deep in the middle of it. But I purposefully didn't use the tablet today, and the console hasn't crashed. But if I log on with the tablet, adjust some movers, then log out, I still get …
  • Hi Scott, I am also running 3.1.3 and have been getting crashes. I am running one cue list that triggers three other cue lists at various points in those lists. Most crashes could be bypassed by "pig, open, backspace", but once just trying to recor…
  • Hello, I am running XP Pro SP2, oneplayback and one programming wing, 1 superwidget, 2 17" ELO touch monitors, Hog PC ver 3.1.3 (b2700). I'll try and send a show file while we are down for lunch. On a side note I have been having some server (stops…