Akito.H
About
- Username
- Akito.H
- Joined
- Visits
- 335
- Last Active
- Roles
- Registered User, Hog Beta
Comments
-
They are trying to find bug. Support team in Kaspersky is still need more clue for this. But they are working for me.
-
I send several type of log files several times. I'm still working with Kaspersky Tech support. I'm not give up yet.
-
Hello henslin, I’m working on with Kaspersky tech support. They gave me ver 19 Japanese ver(I think it still beta). But I’m still having issue. Now I can use Hog4 PC with “stop Kaspersky”. But it’s still band aid situation. I will report here when …
-
I also reported this issue to Kaspersky.
-
Moreover, I can't disable security keyboard. Kaspersky internet security 2018 doesn’t have enable or disable setting. I tried disable and shut down whole Kaspersky internet security 2018, Both didn’t solve the issue. Only way is uninstall Kaspersky …
-
When I reboot windows without enabling security keyboard. Hog4 PC will stacked. because reboot will enable security keyboard. I need uninstall again....
-
I found the cause of the issue. After I enable security keyboard in Kaspersky internet security 2018, Hog4 PC will stack Show join failure. I tried following. Uninstall Kaspersky. Hog4 PC is working fine. Reinstall Kaspersky. Still fine. Enable secu…
-
Thank you MLorenz san for replay. I tried both connected with wifi and just enabled. Also I tried install loopback adapter and use it. All situation didn't work.
-
Moreover Grand MA2 onPC is working fine. Even uninstall Grand MA2 onPC nothing changed. Hog4 PC is saying Show join failure. Thank you, Aki
-
Yes for both. Shut down Kaspersky internet security 2018 and stop windows fire wall. Start Hog4 PC with Run as administrator from right click. Nothing change.
-
Starting with new show
-
I just tried re-install 3.7.1b1546. But didn't work too. However I found one thing. When I uninstall 3.7.1 all files deleted after uninstall. But with 3.8.0b1577. All files remain after uninstall.
-
I tried one network card enabled under DHCP and without DHCP. Both doesn't work.
-
I know Abstraction layer may it works harder. but still it will be nice function for everyone. looking forward in future.
-
Hi Chris, I may have issue on my Windows it self. I gonna reinstall whole windows 10 next week. I gonna let you know, when retry after clean install. I tried static IP address but doesn't work. Give me more time.
-
I tried every thing I could nut still couldn't connect properly. Trying to connect Hog4 PC and WYG on same PC. But my Hog4 PC couldn't detect WYG. Turn off all firewall and connect WIFI router. See bellow for more refer. https://dl.dropboxuserconten…
-
No. 1 and 2.
-
I had 2 consoles. Hog4 and full boar4. And show file is upgrade from earlier version.
-
I couldn't change status to "Connected" even I choose the adapter that connect to router. It's saying “UP”. I tried with static IP and IP from DHCP setting but both ways don’t work. How can I change status to “Connected” from “UP”?
-
I also couldn't work with WYSIWYG R35 and Hog4 PC 3.2.0 on same machine running on Windows10. And also I couldn't work with WYSIWYG R35(Windows 8.1) and Hog4 console Ver 3.2.0. Ether way I could connect wholehog DP8000 on WYSIWYG but doesn't work pr…
-
Thanks Michael Aki
-
Would you fix it?
-
Thanks
-
Thank you guys for your replay. I know the try cue function. but, If we make a cue with delay in effects, it's gonna be very hard to making cue with same offset look. I would like to have several options any time. Again, Thank you, Aki
-
Hi Mitch, I'm still having no access Highend web site from Japan. Are we still down?
-
I had similar issues before on Hog4 with VL2202. And I avoided following method. Knock out value and touch parameter wheel. Thanks, Aki
-
You might use global pallet. Open your colour palette If you can see all types in low. It's a global palette. If you say yes, you need to do the following. Make new colour during playbaking cue. And that cue is used palette. You are havi…
-
Thank you Chris. I really appreciate for that. Aki
-
Sami, ID information is very nice for me. I found a method to solve this issue. On my show data had ID 22. So, delete List 22. But on this moment you still couldn't change cue number. You just need to log off and log in again. After logging…
-
Sami, Thank you for your quick reply. My show data made with Hog4 not upgrade from Hog3. And your picture is very similar to my issue. The ID number is only different from mine. Again, Thank you for your info. Aki
-
Sami, Do you have any issue on that show data? I'm worried about any other issues like side effects of this issue. So far I don't have any issues. Thanks, Aki
-
Thank you Johan, I know that method. And Also know Pig+release makes all releases at the same time. But I would like to control several masters that I chose. And I also would like to use skip go and skip back function. Again, Thank you for y…
-
Michael, Thank you for your replay. Yes, we can open current cue. But we can't open NOT current cue. So, you can reproduce bug with following steps. Play back Cue 0.5. Cue 1 Open.(Trying to open not current cue.) Console Open Cue 0.5.(cur…
-
I have to explain reproduce this bug. Open show data. Cue ### Open. It will open only current cue. It behaves always " Cue Open ". Thanks, Aki
-
Marc, Thank you for your replay. I'm understanding why this was happen. However, this one is also happen with merge. And when you doing with merge, situation will be little bit more complicate. Because, when you fail make a cue with this proc…
-
You guys right, I didn't unchecked "keep Parameters separated" on Kind button. Thank you guys. Aki
-
Thank you for agree with me everyone. Thank you Michael for logging. Aki
-
Thank you Sami. I'll try next time. Aki
-
Jeff, Thank you for your replay. I already have account for Drop-box. But I couldn't understanding how they are able to pick up my show file from my Drop-box account. Chris, Now I'm having cookie. Thank you for your support as always. Aki
-
I just attached show file. Could you check with Position pallet # 41 to 43. You will able to duplicate my issue. This issue is not occur with Hog4 PC, even using same show data. And, Could you tell me how to use dropbox for transfer show file…
-
Chris, I just started with software Ver 1.0.1. And Backed up show data and I upgrade with full install option with Ver 1.1.0. Then, I'm having this issue. And this issue occur with specific position pallets. So, I would like to attach my show f…
-
I'm completely agree with Sami. I also would like to have clear mask button under every selections. It's should bigger than the others. Thanks, Aki
-
Hi Sami, Last 4 years, I worked for Cirque Du Soleil here in Japan as Manager. And that theater had a Grand MA as console. That's the why I can't access this forum. Any way I was back on line. And my students(Yuki and Yuko) might post in th…
-
Phil, I believe that the thing that you believe is correct. Your (Clear) message is completely corresponding to the thing that I think about. Yes,"we use CMY or HSI (with or without an effect), you are able to 'dim' the fixtures using the '…