DrEad

About

Username
DrEad
Joined
Visits
0
Last Active
Roles
Registered User

Comments

  • Hi Reno, Yes, festival console for festival rig, your console for the fixtures you are carrying. Craig
    in Festival Help Comment by DrEad May 2011
  • A few comments about doing festivals from a lighting system engineer, band operator, festival operator... And, not all are relevant to all festivals! If you are the headline act Try to advance with the festival lighting crew chief as much as possi…
  • Hi, Solved that issue by running in Windows XP SP2 compatibility mode... But, have reverted to 3.1.6 as the çheck integrity bug is a bit annoying! "check integrity" comes up with 36 problems. fixing them doesnt change anything, so I guess I'll wai…
  • Hi, I have attached a screen shot of the error message fyi... Regards, Craig
  • Hi Eric, I have tried a few things and have found that this bug is only in 1 of our 2 iPC's. iPC with P4P800-Vm motherboard now does not have the problem, but did prior to doing full install of the 8.5.1 iso file. The console XPE software prior to…
  • Hi Eric, As above "Timezone is set to GMT +8:00 Kuala Lumpur, Singapore" Singapore does not have daylight saving as we are on the equator! I will change timezone later and test it. Regards, Craig
  • Hi Michael, As above, "I have updated our iPC from v3.0.5 to v3.1.2 via 8.5.1 iso (full install)" The clock losing 1 hour everytime the iPC is started has been with us since V3.x.x. It is applicable to both our iPC's (different series motherboard…
  • Hi Eric, Both our iPC's are running 8.04 XPe image, from a full restore, and I have updated both of them to v3.0.5 config & 3pc! 1 motherboard is A7N8X-VM/400, other is P4P800-VM. My guys 1st noticed it after xpe 8.x which was the 1st xpe image …
  • Hi, I think the post in this link is worth reading and the fix is worth trying! Worked for our iPC, which had the same issue for past few updates. :) http://forums.highend.com/showthread.php?t=8655 Regards, Craig
  • Ok, Thanks Chris.
  • Hi Chris, Will v3.0.5 be out very soon? I have 2 clubs I upgraded to v3.0.4 today and they both cant change page tonight. This bug is a bit of a show killer. I'll downgrade them to v3.0.3 tomorrow unless you expect v3.0.5 out sooner...! Regards, C…
  • Hi, I haven't done it myself sorry, but a few people in the ArKaos forum are doing it. What I understand from the ArKaos forums is with the SandNet program installed and running on same PC as Hog3PC, it can read the HogNet or Hog DMX output and co…
  • Hi, You can use a piece of software called SandNet to link Hog3PC to an arKaos comp via artnet... Regards, Craig
  • mmmmmmm... I love the idea of a tactile gestural performance mode for controlling a 'light' show, especially as I integrate more multimedia sources, led fixtures, cmy based moving lights, digital spots etc controlled from the hog platform consoles. …
  • Hi, After reading some other posts, regarding V8.3 iso disks and older iPC's not working, I have checked out the console and my 'method' again and believe that I probably 1st tried installing v8.3 iso. When I installed the iso a 2nd time it was from…
    in iPC Freeze Comment by DrEad April 2009
  • iPC 2 x 15" ELO touchscreens 1 x playback wing keyboard & mouse Hi, I had a similar problem with a loan iPC recently. I think the Bios battery is flat as time changes every time I power up the console and I am guessing that this caused the oth…
    in iPC Freeze Comment by DrEad April 2009
  • Hi Ryan, The Hog3PC's are dedicated for lighting console... I hadn't needed to look into changing network infrastructure before as the system was working properly and did everything I needed... I only use the network for updating windows, hog3pc and…
  • Hi Ryan, I do have the loopback adaptor installed as this is how I previously had the systems running properly. But I still can't work out how to get hog3pc v3.0.x to look at it. Our network has at least 150 devices and has additional access points …
  • Hog3PC V3.0.1 Windows XP Pro SP3 Norton AV 2009 2 Gig Ram, NVidia Quaddro 3 x ELO 15" touch screen 2 x playback wing, 1 x programing wing, 1 x super widget Hi, A further update to this problem... I tried to recreate a couple of network problem sc…
  • Hi Chris, The backup file was saved in v3.0. Regards, Craig
  • Hardware: iPC with A78NX-VM/400 motherboard, 2 x original 12" ELO touch screens, mouse & keyboard, no network connection. Hi Chris, et al. A quick note regarding a problem we had during v3.0.1 (re)installation on our iPC today. 1. changed vi…
  • Hi Chris, Thanks for the fix! I hadn't reported the bug but we had same problem with 1 of our iPC's with the A78NX-VM/400 motherboard. The other iPC has different motherboard and I had no problem installing v3.0.1. Regards, Craig
  • Hi all, Thanks for the belated interest! We are ok for operators at the moment, but as staff come and go, I will be keeping record of people who are interested... I often need part-time operators for functions etc, so if there are any Singapore resi…
  • Hi Chris, Dedicated PC for Hog3PC system, XP Pro SP3 Nvidia Quaddro video card Asus P5LD2 Deluxe Motherboard 1 x Philips 190B monitor, PS2 mouse & keyboard No Hog hardware, touch screens etc attached. We haven't been able to prove or disprove …
  • Hi, However, you cannot install Hog3PC on a PC with SP3 installed as the Hog3PC install looks for the SP2 signature... Regards, Craig
  • Hi Chris, etc There does seem to be some issue regarding monitors in Hog3PC with XP/SP3, but it is possibly caused by the NVidia Quaddro card. I am chasing Nvidia regarding that and will update here if I get a reply. If I go to Control Panel and cha…
  • Hi Chris, The Hog3PC aplication doesn't change the video resolution, but I think the XP SP3 update resets the resolution to a default 1280 x 1024 on start up. When I started up the only Hog3PC setup I have which uses the ELO touch screens they were …
  • Hi...An update... The problem has been solved by formatting the HDD and reinstalling windows, 103 windows update, hog3pc etc etc etc... :) Windows repair didn't solve it. I went this route after I found I could easily setup the wings and everything …
  • Since changing to Hog PC system from iPC I have had to uninstall and reinstall Hog3PC (v2.3.1) then install widget and wings every day to get the system working. The wings will not install correctly and come up with windowsXP 'cannot install hardwar…
  • Marty Postma said: If there is no address here click/touch the dropdown arrow to assign or change the assignment of your wing. If there is only one #### to choose from then the console is not "seeing" the other wing and you may have a bad USB po…
  • Hi Steve, Will get back to you with the colors lists tomorrow, but they are very different from the lists you have here, which are correct! I'll try a new show with the scans to check if it's a merge fault. Ciao, Craig
  • Hi Brad, Full XPe 8.0.6 image install. I think it only happened after I changed 3rd monitor resolution to 1024 x 768 75hz 32 bit, but it is a constant problem now. ie whenever i enable 3rd monitor it will do the same thing. So I assume it has writt…
  • Hi Brad, Late reply, but problem disappeared after the console crashed 1 night a couple of weeks ago. When we rebooted it this problem had gone. Not easy to recreate! Ciao, Craig
  • Hi Brad, We aren't having this problem with our other iPC. The event monitor doesn't show this up as 'missing' button pushed. The other directories all open as per usual with either open or double press. I wil investigate this a little more next wee…
  • Hi Brad... A quick related question... Is there a way to change the 'default' to not being 'global' for a palette, or for a fixture type. I'm working with a lot of different types of led fixtures, which it would be very cool to be able to make the c…
  • Hi Brad, The monitor is VGA connected via an adaptor to the dvi output. Regards, Craig
  • Hi, An interesting update for this thread... Today I turned on the system and the cursor is tracking from left to right across the 3 screens in the correct visual order! This is with the 3rd monitor on left of 2 touchscreens. The 3rd screen is not …
  • Hi All... The console specs look great :) and I can do without midi for now...!! I want to trade in the 5 HogPC systems worth of super widgets, widgets, wings and iPC 12" touch screens for some RoadHog's... Have upgraded our 2 iPC's to 17" touchscre…
    in Roadhog Comment by DrEad April 2007
  • Hi guys... was the macro fade times implemented in v2.1.0? Hoping!! Craig