scratch

About

Username
scratch
Joined
Visits
4
Last Active
Roles
Registered User

Comments

  • Suspect Tranny was the right call. Never can trust those Trannys.
  • Sorry, I fixed it right before Mardi gras and have just been forgetting to update. or I should say I made it work.... We bypassed the hardwire in the walls and just jumped straight from our DP down to the lights and they work fine now. We a…
    in DMX issue Comment by scratch March 2007
  • Ok, my situation confounds me even more... So the colormerger units on the end of the line work fine. I started a the end and began taking instruments out of the line, just connecting the lines to bypass them... and the colormerger stopped workin…
  • I am running two Whole Hog 3's for these instruments. A console for live shows, and then we switch to a rack mounted unit for the daily atmosphere lighting. They are not parked and they are still there in the patch. All of the instruments are wor…
  • Well that is a relief. I am manually telling it to strike and it is ignoring me.
  • The lamp hours did need to be reset but that was not the problem. The ignitor is not even getting the push to ignite the lamp. That telltale "zzzzzzzzzzt" sound as it ignites. All the connections from Board to Ballast to Ignitor to Socket are abl…
  • Well, after even more diagnosing. Swapped out logic boards. No. Swapped out ballast. No. However, in playing with it in manual mode, something interesting was discovered. I can strike my lamp and tilt back and forth all day long. However, if I…
  • Just one more additional observation. When it homes at the start of its cycle, the head is facing at a downward angle. This is when the lamp strikes. Next it rotates around so that the head is facing directly up. ABout halfway through this rotati…
  • The fans are working fine and the DMX functionality works for every other aspect (pan, tilt, etc.). I am just getting LITE OUT error message on the display screen once the lamp goes out. I have been doctoring several sick Mac2ks this week, so …