BBCLD
About
- Username
- BBCLD
- Joined
- Visits
- 86
- Last Active
- Roles
- Registered User, Hog Beta
Comments
-
The fader automation worked great in 3.8. I hadn’t done an update in a while because I have 10 consoles on 6 campuses that I have to do at the same time. I program most of the shows from 1 location and send files out so I wait until there is an up…
-
Apparently it has something to do with the docking. It still defaults to the virtual wing and pushes all the faders up. Is there a way to turn off the virtual wing for the faders that are on my Nano?
-
Thank you! I will check it out.
-
Thanks for the help. Maybe this could be a future enhancement?
-
No, everything is clear at that point. I have closed, restarted, and checked all system functions at that point. It is just holding the attributes after release and tracking them through the duelist restart.
-
Thanks Kurtis. I will give that a shot.
-
I have to admit. I feel like an idiot. I didn't read the manual for DMX addresses. They are either off or on. I will be referring to the manual more often now.
-
I had the same problem after 3.2.3 came out so I rolled back to 3.2.2 and haven't had the problem since. I did not reinstall 3.2.3, I couldn't do anything without a crash.
-
I figured out the problem it was an Id.10T error.
-
3.2.2 is working fine for the most part. I did have one instance where the desktop stopped responding yesterday but that is the only time that has happened. Any other words on 3.2.3? Are others having trouble with it? Did you find something that…
-
I emailed it to you yesterday. Did it not come through?
-
The desktop keeps crashing and locking the console up. I press hog, open, backspace and restart the process. Then I go for a little while and then it happened again.... I recall my view and all is well. However, anything in the programmer has to…
-
There are a couple of ways to do this. What version are you updating from? If the version is too early it requires a full restore which requires a little bit of walking through. If it is from a fairly recent build you can do it from the start up …
-
Ok, thanks. These are some things I just wanted to try. I have a lot going on Sunday mornings and it would just be nice to keep track of it across our network. So much potential. I am already using Team Viewer and accessing the Hog PC across the…
-
What is happening is that when people boot up their computers they are getting the IP address from the Hog instead of from the network servers as they should, which causes problems for that user/printer/server. I am really wanting to be able to c…
-
Update: I plugged the show file into my RHFB and everything is working as it should. I will probably uninstall and reinstall the software now to see if there was an issue during install. Please let me know if you figure anything out though. Th…
-
Is there a way to pull off an old fixture profile from an older version? The Mac 575 profile that HES put in the lastest library is all messed up. The only thing working is intensity and movement. I looked at the attributes and the color and gobo…
-
I have had similar problems. I have found that my desktop crashed so I restarted the desktop and everything worked fine for a while after that. I usually leave my console on. So far it has not happened at show time but it has happened during rehe…
-
Thank you! This is all very helpful information. I still have a long way to go but I appreciate the help in getting started.
-
I am on a full boar on the 3.9 release. I will have to play with the Logic software and see where I can go with that. Thanks for the info. I will play with it some more this week.
-
Thanks Chris! I missed the address on the DP. I thought it was the IP not the unit number, that's where I got tripped up. It works great!
-
I added a DP8k, I don't know how to give it an IP address since it is not really there. Is there something I should do to make it work? I am using the internal DP8k for controlling my ArtNet stuff and added a second DP cloned from the first for …
-
That's what I thought. It is saying that it is idle and that it is waiting for connect. Every time I hit connect in WYG it tells me that it cannot connect.
-
Does the user number need to be different?
-
Okay, I got rid of the error message by reconfiguring the network settings for the thousandth time, but I am still not getting it connected. The PC sees the IP of the Hog but they are still not communicating. What now?
-
Thanks Quinn! That seemed to work. I hadn't seem that tech note before.
-
I am not quite sure how to take that.
-
Chris, I tried and tried and it never worked so I had my computer re-imaged because of several errors. Now however, I can install but can't open. I am not on Windows 7 32 bit and I am getting an unknown exception error. Any suggestions?
-
Thanks. I will try that.
-
Chris, I am using XP SP 3 and I am running Hog 3.1.6.
-
Thanks, I will try that.
-
Thanks, that worked after some playing around with it a little.
-
Thank you.
-
I thought of that too. I was hoping there was a way to set up a cue just to do a single flash as the cue is triggered. That may be more of a keystroke macro thing that the Hog can't do yet. Oh well, it was more of a hope that it really was an eas…
-
I figured I could do it that way. I was just wondering if there was a way to get one cue to trigger and release in one step so that I can put it in my song cues so that the video would change as needed with the music. The videos will be setup ahea…
-
Brad, The touchscreens are ELO ET1725L's. The DVI connector is a DVI-D (single link) on both. I checked out the VGA cables with two different types of DVI adapters (DVI-I Single Link and DVI-A) and the console does what it should so that part m…
-
That is correct and yes I see the startup screens on the externals but I can't activate the internals at all except when I touch the screens that works until I re-calibrate. I am using the XPe image that was on the v.3 ISO image.
-
Not exactly, I have to unplug the monitors to boot up or else the internals don't work except for the touch feature (no video). Then I plug them back in after it boots up then enable and recalibrate every time I do a restart. The externals override …
-
Yes. The Full Boar had barely been out a month or two by the time I received it.
-
I have only had the console about 10 months...Do you think the battery would fail that quickly? Yes the XPe image is up to date with the latest software update.
-
Yes. I usually do when it is a big update like this. Sorry, I forgot to mention that.
-
I use the DVI with the USB because it hasn't worked without the USB connected. It is also easierto use the DVI straight through than converting from DVI to VGA.
-
I use 2 ELO ET1725L 18" Touchscreens.
-
I usually calibrat my screens after every re-start. Partly due to the fact that I have to unplug my external monitors and it resets all of my screens calibration. It is not a bad idea to recalibrate anyway just to make sure that you are not touchi…
-
Parts of this thread:
-
Thanks Brad.
-
I know it has been a while on this one and there has been a software upgrade or two since then, but I just want to keep this challenge in someone's memory hoping that it will make it into one of the upgrades soon. After talking with tech support, I…
-
OK, after many weeks of trial and error and no luck. I finally did go into the processes and found this message: (maybe this will help) Name: Desktop State: Not Responding PID: 508 MQ: 7 Command Line: -port=6600 -nodeid=1 It looks like n…