bradpepe

About

Username
bradpepe
Joined
Visits
0
Last Active
Roles
Registered User, HES Alumni

Comments

  • Super.. We are expecting many to compete, so be sure to come to the booth early to sign up for a slot! See you there!
  • You have mail...
  • Your best bet is to contact our support at 800-890-8989 or [email]support@highend.com[/email]
  • thomash35;58058 said:I am in need of the frame tables/DMX Values for the Intellaspot. I am working on a grandMA and have begun to doubt the accuracy of the fixture profile I am using. I know how the 39-channels lay out what I don't know is what DM…
  • Hi Richard, You can view the dimensions on the data sheet that is linked from the product page: http://www.highend.com/products/automated_luminaires/TrackspotBolt.asp The fixture is roughly 4 inches longer than the original Trackspot. The light so…
  • The most important is not those fixtures, but the (unseen) Wholehog 3 in control of it all! :hogsign: Great job Scott and team!
  • Hi Maikel, >>it´s not posible to record a "fader value change" to a macro can you set this on a to do list ? Yes this is on the list already for the next time we update the macro functionality.
  • Marcin, You said "please be aware of the fact some people Mitch has on his mailing list might have moved to other consoles over the last few years " The only customers who received emails from Mitch are those that purchased a DP8000 within the dat…
    in dp8k 3.2.0 Comment by bradpepe July 2011
  • Marcin, You said "The console has been out there for almost ten years now and still it doesn't work as it should." Hmm I know of thousands of shows over the 10 years that have had extremely successful shows using the console. There were some roug…
  • tymon;55980 said:And now, from a friend of mine I get a technical bulletin saying there was a batch of DP8000's with bad firmware. How come this was not made publically available? Why didn't I get it straight from FPS/HES/Barco? Marcin, Yes it is t…
    in dp8k 3.2.0 Comment by bradpepe July 2011
  • Hi Maikel, Thank you for posting your resolution here. I will see that this gets logged and is corrected when possible.
  • SanderL, I agree with Hugo that it sound like your main cuelist is getting stomped by the IPCB fader when all fixtures are involved. In your main cuelist, turn on the cuelist option "Persist on Override" to prevent the stomping.
    in IPCB fader Comment by bradpepe July 2011
  • stagelites;55821 said:Wouldn't be a bad thing to add back. Then I could put the master on a wing. Plus I would not have to worry about making sure that I have not forgotten a fixture in the group. Peter, A good trick to ensure you get ALL your fi…
  • Hi Maikel, You asked "but how can i use the fader of the wing by using a PC or a hog without wing in the conected show?" You can not adjust the faders without having physical faders attached. The only options are to use the option in SETUP/Prefe…
  • I will have to look further into the manual as you describe Phil. I think that this is old functionality from the very early days of the console (I remember moving the GM around). However you have not been able to do this for a long time now. But…
  • Jernej, does your boot up time calculation include "show loading" or just booting to the start screen?
  • >>do you plan to release one for android? We are currently studying the existing and emerging phone platforms to determine our best course of action for the majority of customers. In the mean time, you can still use a tablet PC running Hog 3…
  • Hi All, We are in process of changing servers and have experienced a few hiccups. Sorry for the inconvenience, but the work should be complete in a few days. thank you,
  • Hi Marc, The iphone app has been delayed and planned for a future release. I do not have any specifics as to when it will be available.
  • Jeff, Prices change.. why is gas more expensive now than 10 years ago? Cars cost more too... Also sometimes deals are made at a product launch to entice early adopters. I do not have any specifics as to why these prices have changed, but it is no…
  • This feature suggestion has been logged and will be considered for a future software release. It is not included within v3.2 as it was suggested late in the development cycle.
  • Hi Stephen, Unfortunately the ability to set fader and flash key defaults is much more difficult than expected. The request has been logged for some time and developers have even looked into it periodically. The original code makes this a very di…
  • Hi Damo, You can not currently control the faders through MIDI or DMX. This is on our request list for the future.
  • Do you have a terminator plugged in to the last unit? This is likely a lack of termination problem.
  • Hi Alex, Two questions, 1. Do you have an external monitor connected via USB? 2. Are you using the shutdown command when you turn off your console or just powering it off?
  • In Setup/Preferences you can create an auto-launch macro. This will allow you to use macro syntax to do whatever you want when a show is launched. In Setup/Control Panel you can assign a show file to auto-launch when Hog 3PC starts.
  • Hi Tim, The best we can offer is the list of fixtures in the library. We do not have a spreadsheet of the various channel designations of all fixtures. It would be an interesting exercise however... you might contact http://www.carallon.com/ as t…
  • salsol;55218 said:hi im having a similar problem with my roadhog...but it doesnt boot up....it goes past the roadhog logo and just hangs......nothing happens......any ideas? Please contact our support department directly at 800-890-8989 or [email]su…
  • Hi Stijn, This indicates that you need to do a clean start on your desk. Be sure your show is saved to several disks and then press the blue button on the back of the desk. Then reload your show and all should be good... A clean start is a good …
  • frank_schotman;55161 said:You got mail from a old HIGHEND PSS! hehehehe Come on Frank.. you are not that OLD! :147: I hope all is well... it is good to see you on the forums
  • Hi Chiefo, You said "why isn't there any wholehog network hardware? Like a wireless router (in anodized blue featuring airborne mammal motif, obviously)." Actually early in the project (2001), there was a Wholehog annodized blue Ethernet switch, b…
  • Hi Kurtis, This feature request is logged, but as of right now we do not have it assigned to any upcoming release.
  • Jeff, What is the exact error message? Also you can download the current full library at: http://www.flyingpig.com/support/hog3/downloads/library/index.shtml then just store this on your computer in a location you remember. Then as you start new …
  • First question Avi.. Since you state that your board has not been updated in 3 years, what version software are you running? This will be a big help to determine what is going on in regards to cuelist releasing problems. As for opening cuelists, …
  • Hi Matt, You can use Hog 3PC and print to PDF, but there is no export of data available at this time. We do have plans for the future to enable this type of functionality.
  • Someone was doing this a year or so ago... I don't recall the website, but I will try to find it..
  • Gildebrand, This is certainly a good idea and will be logged for future implementation. Please also keep in mind that the functionality you are looking for to mask what marks, is available by building your own mark cues. I often use a combination…
  • 3.2.0 is getting closer... believe me, we all want to release it as well. However, we will only do so when we are completely satisfied that it meets our release requirements. Good things come to those who wait, and v3.2.0 is certainly worth the wa…
    in 3.2.0 Comment by bradpepe June 2011
  • Thank you Gildebrand, Many of these items are already on our to-do list for an effects engine rework we have planned. I will see that those that are not already logged get logged. thank you,
  • Hi Steph, This is a very cool idea... and an easy concept to implement and grasp. I will see that it is logged.
  • Phil.. Multi-part fixtures is definitely planned for the future and will likely use the decimal in a manner similar to what you describe. It is an important feature for LED and digital products.
  • Ben, You can edit any of the palettes that have been created. You can not edit what happens during the auto-palette creation. Just merge new data into your existing palettes when you had more fixtures.
  • Hi Austin, What console are you using? You mention a floppy drive, so it is probably an older type console. Once we know the console type, then we can better help you.
  • We have this item logged and will discuss it further internally.
  • v3.2.0 is feature complete and about to release, so no it will not make it into v3.2.0.
  • v3.2 is undergoing final testing now and should be released within 2 weeks...
  • renomo;54344 said: I know the obvious way would be to call up the desired fixture hit touch or suck, open the programmer window, select the parameter cell, right click Copy, call up the other fixtures, and paste the parameter into their cells. Tha…
  • Hi Thymebalm, Unfortunately you can not do this currently. However our new software v3.2 which is due out in a few weeks has keystroke macros. With the new macro function you will be able to do this with ease.
  • Hello Mschofstoll, This is very easy to do. In the patch window, select the fixture or desk channel and then press the "Reduce to %" button on the bottom toolbar. Then enter the max value you want it to achieve. You will still be able to adjust …
  • Hi Cormac, We can help you with this no problem. I will send you an email with contact information.