RoadHog4 Console crashing Dante I/O device.

Hello!
So my system as of now is a Mac mini running Qlab 4 controlling a Yamaha QL1, video computer and RoadHog 4 as well as a Dante I/O device. We have been able to get to the system stable but if I restart my lighting console or we try to boot the sound system with the console plugged in, the Dante crashes. IP addresses are in the same range (10.0.0.X) and subnet mask 255.255.255.0. I wish I could isolate the Dante but in order to have OSC control of the QL1 they must live on the same network. Thoughts on what could be causing this?
So my system as of now is a Mac mini running Qlab 4 controlling a Yamaha QL1, video computer and RoadHog 4 as well as a Dante I/O device. We have been able to get to the system stable but if I restart my lighting console or we try to boot the sound system with the console plugged in, the Dante crashes. IP addresses are in the same range (10.0.0.X) and subnet mask 255.255.255.0. I wish I could isolate the Dante but in order to have OSC control of the QL1 they must live on the same network. Thoughts on what could be causing this?
Tagged:
Comments
I am not familiar with all of the gear used but looking online, Dante devices seem to be audio/midi devices. The Dante and Road Hog likely do not play together nicely on the same network.
Is the Road Hog connected via the FixtureNet port or HogNet port?
Are you sending Artnet or Midi to the Road Hog?
So you still can send and receive OSC from Qlab (guessing the Qlab is the main control)