› ›

Hog4 PC and Playback Wing Touchscreen

HillbillyHillbilly Registered User
edited May 2014 in Hog 4 OS Software Discussion
For an upcoming event I need to run Hog4PC. I had an extra Hog4 playback wing sitting around so I thought I would use that and make use of the touchscreen as well. However, I cannot get the screen to calibrate.

When I touch the bottom left corner of the screen, the top right receives a button press. When I touch the top left corner of the screen, the bottom right receives a button press. Basically, it seems to be flipped around and backwards.

Any thoughts here?

Windows 8
Hog4 PC V 2.1.2 b565

Comments

  • Woodj32177Woodj32177 Registered User
    edited February 2014
    Can you not use the elo touch app to calibrate it?
    If not, I would suggest updating your elo touch drivers, and trying again.

    Since it is in Hog PC, this should happen before booting hog pc...
  • HillbillyHillbilly Registered User
    edited February 2014
    I tried using the ELO touch app, but it just says "No ELO device detected" and then shuts down.
    This would be extremely practical if it only worked.
  • Woodj32177Woodj32177 Registered User
    edited February 2014
    Then I am no help whosoever. Sorry.
    Good luck...
  • PgrimpoPgrimpo Registered User
    edited February 2014
    I'm having the same problem here. Have spent 2 hours on it. Has anyone found a solution yet?
  • PgrimpoPgrimpo Registered User
    edited May 2014
    I was wondering if anyone has found a fix for this. Thanks!
  • sauce247sauce247 Registered User
    We have the same problem. HES knows about it and are working on a solution. The touch screens on the H4 Wings are not ELO. Still I'm not sure why the drivers in the H4 console can't be distributed to those on a PC/Wing setup.
  • PgrimpoPgrimpo Registered User
    That's great to hear! It's been a pain having the controller set there and keep jamming my finger to the screen, thinking it'll do something ;)
  • MLorenzMLorenz Registered User, Hog Beta
    H4 OS on the console is unix... PC is windows... different drivers.
    Displays afaik are from Barco
  • Michael_GrahamMichael_Graham Registered User, Super Moderator, HES Staff
    Hello All,

    We are releasing version 2.7.0 today and the monitors on the H4 wings should now work on windows.
  • PgrimpoPgrimpo Registered User
    This is great news!
  • PgrimpoPgrimpo Registered User
    I have been looking for this update for the last week, but 2.6 is still listed for HogPC. Where is the place I should download this?

    Thank you!
  • hydrushydrus Registered User
    Scroll down just a little bit and you'll find the 2.7 .msi for PC
    https://www.highend.com/products/lighting-consoles/hog-4pc#s5_menu_wrap
  • PgrimpoPgrimpo Registered User
    Thank you. If you click the big "Download the software" link on the page, it takes you here, which doesn't have the current software: https://www2.highend.com/support/controllers/Hog4PC.asp
  • Michael_GrahamMichael_Graham Registered User, Super Moderator, HES Staff
    edited February 2015
    The link above is directing you to the old site.
    You can find the software under the following:
    Products
    Lighting consoles
    4PC
    Scroll down to the Hog 4PC Support software downloads section.
    I will get the Download the free software link fixed.
    https://www.highend.com/products/lighting-consoles/hog-4pc#s5_menu_wrap
  • MLorenzMLorenz Registered User, Hog Beta
    Michael, the first link is still pointing to the old site.
    The one in the text saying: Download the free software
Sign In or Register to comment.