Multiple Cue Playback

You can use comment macros to trigger multiple faders with the click of play on one cue list. That would be the easiest. Otherwise, just use multiple fingers to hit play! :hogsign:

Matthew,

What Patrick said is correct, but is sounds as if you might have other issues. If you are:

First ensure that the information in the 2nd or 3rd lists is not stomping out / overriding the same info as in your 1st list. (see manual for more info)

Second in the options window (press Pig+Choose) make sure that you have your playback settings the way you need. ie release on other go / persist on override / priority / etc....

Good luck.

Hey,

Thanks for the replies.

The problem was as you suggested. Chase 1 override Chase 2 and therefore stopped it.

Another quick questions: Is it possible to delete fixtures from cues. I recorded them with a value of zero and now I don't want them in there at all.

Thanks Matthew

All you need to do is use Knockout.

Open the cue you want to edit, select the fixture, press knockout, then update.

hope this helps...

Mark

You can also select the fixtures you want to remove, "touch" them...

Then RECORD REMOVE (on the left hand screen lower toolbar) Cue X thru Y.