Roadhog video issue

jsteeljsteel Registered User
Hi there i have just replaced my power supply in my road hog as the old had been hit with a power serge.
while waiting for the new power supply to arrive we were using a standard ATX power supply and every thing was working fine.
anyways the problem is that the secondary screen (run of the on board video out put not the riser card) is not working any more it turns on and dose the normal no input then blank screen is there anything in bios you need to do or any other thoughts...
im about to refit old power supply to see if that helps


  • MitchMitch Registered User, HES Alumni
    edited December 2009
    Hello, it sounds like the BIOS settings may not be set correctly. You can see the link below for the proper BIOS settings. If they are not set correctly, the BIOS battery on the motherboard may have failed.
  • jsteeljsteel Registered User
    edited December 2009
    thanks got it sorted it was a bios fault
    thanks guys
Sign In or Register to comment.