Please kill Fixture Builder

Why does Fixture Builder still exist when it is known to cause serious problems???
I just had someone sit in for me who isn't as hog3 savvy as most of us here are and they inadvertently opened fixture builder to try to make a new profile and it nuked the desktop process, freezing the whole console and making a lot of people in the studio very unhappy while I got a frantic phone call and had to walk them through a restart.
Luckily the show file was not negatively affected, but it caused a lot of undue stress and general mistrust in the lighting control system.
Can the button be removed or access prohibited until the thing gets fixed?
I just had someone sit in for me who isn't as hog3 savvy as most of us here are and they inadvertently opened fixture builder to try to make a new profile and it nuked the desktop process, freezing the whole console and making a lot of people in the studio very unhappy while I got a frantic phone call and had to walk them through a restart.
Luckily the show file was not negatively affected, but it caused a lot of undue stress and general mistrust in the lighting control system.
Can the button be removed or access prohibited until the thing gets fixed?
Comments
Regards,
Regards,
There is an advertising, guy should think before use it, but Perhaps we could have a key to open it (Like 666 :sasmokin:)
Ross
Regards,
There are warnings that pop up already....if the operator chooses to ignore the warnings then that is really the problem......if the sign says "Dead End" and the driver plows forward anyways....then the driver is at fault....not the road....
Anything on a mission-critical piece of equipment that tells you "Proceed at your own risk" is a really big problem and should not be made accessible until it is fixed!
The problem is NOT on the user end where the option for system failure exists in the first place.
Regards,
Mark