A big problam with the Fixture builder
amir877
Registered User, Hog Beta
I try to build a fixture but every time i try to open the builder the desktop crash !
So i understand that its hapend only if i have some info on the external screens.
Help, i have show tomorrow and must build that fixture, i also want to knew if its safe to take the console to the show.
System:
1 x WholeHog III (R2440)
1 x DP2000 (R2440)
2 x Ex.screens
1 x Hub
1 x Wysiwyg
Thanks
Amir
So i understand that its hapend only if i have some info on the external screens.
Help, i have show tomorrow and must build that fixture, i also want to knew if its safe to take the console to the show.
System:
1 x WholeHog III (R2440)
1 x DP2000 (R2440)
2 x Ex.screens
1 x Hub
1 x Wysiwyg
Thanks
Amir
Comments
a few suggestions
1.Try and build your fixture on Hog III PC and transfer to your console.
2.Ask for a lib file to be made by posting in the requests section of the forums.
3.Disconnect wyg/external monitiors etc and try again to build your fixture on the console.
Best C
I think the problame was the external screens, i discunect them and it work
This all WH3 thing start to annoy me...
What resolution were your external monitors set to and what windows were open?
The screens were 800x600 75Mhz
The windows open is:
Wholehog t.screens - palletes (G.F.C.B)
L.Screen - Programer
R.Screen - Effect lib+ effect editor
Must of the time the dasktop crash and black all screens
One time it even do a error message, i thing its the bigest error i ever seen...some pictures..
Amir
1x whiii
1x dp8000
If I select all the real world info and give it the pan value 720° (you can see the photo) the desktop is in block, and I need to reset the desktop for working.