Chauvet ColorPalette library?

Comments

• lightbright Registered User

  July 2008 edited July 2008

  I am also looking for a library file for the 4 channel Colorkey Par 64 LED
• Mitch Registered User, HES Alumni

  July 2008 edited July 2008

  You can go to the web site linked below and create your own libraries.
  
  http://www.denis-hessberger.de/
  
  You will need the DMX information for each fixture. This is usually found on the manufacturer's web site.
• lightbright Registered User

  July 2008 edited July 2008

  Hey!
  I've made fixture librarys for these fixtures, but I can't seem to add them to my show. I can add them into a new show, but I can't merge it onto my currnet show disk. Am I missing something?
• Mitch Registered User, HES Alumni

  July 2008 edited July 2008

  Hello, the page linked to below explains how to add fixtures to an existing show. You do this on a PC not from the lighting console.
  
  http://www.highend.com/pdfs/training/AddingLibFiles.pdf
• lightbright Registered User

  July 2008 edited July 2008

  I Just figured out how to do that. For some reason I thought you could do both.
  
  Thanks!
• lightbright Registered User

  July 2008 edited July 2008

  Library works great, thanks for the help. But there is one thing I can't figure out: There are seeral control modes, 27 channel and 6 channel are the ones I use. It seems like I cannot use a mode that is not set as the default in 'patch' >'edit fixture'.
  
  no matter which conrtol mode I choose for a cue, during playback the default control mode is used
• Mitch Registered User, HES Alumni

  July 2008 edited July 2008

  Hello, the 6 channel mode and the 27 channel mode will each require it's own library. A library is specific to the mode it is written for.
• lightbright Registered User

  July 2008 edited July 2008

  ok thanks! I'll just use 27 channel, and suffer through making the palettes once and be done with it.
  
  THanks