play media once forward error

Hi there,
I've got the following problem. When running a m2v in mode media loop forward the movie is outputting without a problem. When using mode play media once forward the film is stops 10 second to early. The in frame is set a 0 and the out frame is set at 65536.
What is happening here ?? is it a bug at the m2v file :mad: ? is it a bug at the dl2 :mad: ? or is at a bug by the operator :rtfm: ?
Hope to hear from you soon.
Greetings
Frank Verbeek
Production Partners
I've got the following problem. When running a m2v in mode media loop forward the movie is outputting without a problem. When using mode play media once forward the film is stops 10 second to early. The in frame is set a 0 and the out frame is set at 65536.
What is happening here ?? is it a bug at the m2v file :mad: ? is it a bug at the dl2 :mad: ? or is at a bug by the operator :rtfm: ?
Hope to hear from you soon.
Greetings
Frank Verbeek
Production Partners
Comments
File A - stops 10 seconds too early.
Try with File B - Does it still stop too early? If not, it's probably a file issue. If it still stops 10 seconds too early, it might be a programming issue.
Do you have a random "Sync to" programmed to something that doesn't exist?
With everything cleared and released, can you play the full file without issues (narrow down programming issue)?
Try those and see what you come up with....
narrow down your error possibilities by changing the file
i,m not at the pre production location anymore but gone try it with different files on monday on the show location. Show is the next day so there is plenty of time. I now have solved the problem temporally by using media loop forward and add an extra cue with a media mode paused and a wait time in the cuelist of the length of the film
Do you have a random "Sync to" programmed to something that doesn't exist?
sync to is not used i'm sure of that
With everything cleared and released, can you play the full file without issues (narrow down programming issue)?
problem also exists when the dl2 is only in the programmer and all scenes and lists are released
If the GOP structure is not set to be all "I" frames, then things like this can happen.
I'm sure you have this link already, but just in case, have a look at:
http://www.highend.com/support/digital_lighting/CreatingCustomContent.asp#Steps
As everyone has suggested odds are high that it is likely something in the encoding of the clip.
Check against all the recommendations we have posted in the Content Creation section on the web and see if there is anything obvious that jumps out. If not, you can send the file to us and we can determine the cause for you.
Scott
I'am converting my content with Apple compresser. I,ve never read the part of converting the media for os X. I just start using FCP compressor because i was used to the FCP studio and it has a mpeg2 conversion setting. I should have :rtfm:
Sorry that i've wasted your time but thanks for the help
Greetings
Frank Verbeek