Gobo Refurbs

tbslytertbslyter Registered User, Hog Beta
edited August 2007 in HES Automated Lighting
We have a couple of gobos in our X.Spots that have some minor scratches on the black/sliver coating around the outside of the gobo. What paint/coating does HES litho lab recommend for gobo touch ups? Thanks.

Travis Slyter
Ruehling Associates, Inc.


  • joe_hallerjoe_haller Registered User, HES Staff
    edited August 2007
    I'm told that the silver side is special formula that we use, but the black side can be cleaned up with Rust-Oleum High Heat 1000deg # 7778, which can be found at a local hardware store.

    Good Luck!
  • PuffyfishPuffyfish Registered User
    edited August 2007
    I usually set up a light table and have a few fine art brushes handy and a magnifying lens on my head to see the gobo close up. Black out everything but a circle the size of the gobo. At 1380 dpi the details are quite fine so take your time.
Sign In or Register to comment.