Reproduce selection from a fixture to an other

Hello,

Does compound fixture User Numbers help with this?

Hello, I don't think so.
I have not found a new feature to reproduce a selection in a compound fixture, whatever is the selection, on one or more other compound fixture(s)

thanks

Only way to get close is make a selection like 1 > 100.2 +.5 + .10 + .17 etc.

thanks sautrane for your answer.
When you have 200 Magicpanel so 7200 compound fixtures ( 21600 fixtures in RVB mode or 28800 in RVBW), it's a bit too long ;-) it would be interesting to make a sélection in a compound fixture and copy it on others.

Sorry, I read this wrong. I understand now what you are looking for and I will get a request opened for this

Thanks!!

Steph, I understand what you mean and it would be nice to be able to record and copy different kind of selections.
But, IMO using lateral selection doesn't make command line very long. It is just as long as the amount of cells in one fixture and even if you have the possibility copy the selection, you have to make the selection.
So when you have 200 panels only one thing changes 1 > 200.2 +.5 + .10 + .17 That selects cells 2,5,10 and 17 in all panels between 1 and 200. Or is there something I don't quite understand?

This is not what I want to do. With your way, the order selection would be in first all the .2 then all the .5 then all the .10 then all the .17. I will always be dependent on the order of fixtures numbers. what is important is the selection order in the origin compoundt fixture and the selection order of the compound fixtures of destination.What I want is to copy the selection order of the cells of a compound fixture on others compound fixtures taking into account the order of selection of the compound fixtures of destination.

Not sure that I'm clear so :

1---2---3---4
5---6---7---8
9--10-11-12
13-14-15-16

I want to be able to copy the selection order of cells of compound fixture 1 on cells of compound fixtures 1, 2, 3, 4, 8, 12, 16, 15, 14,13, 9, 5, 6, 7, 11, 10.
So the final selection order would be :
1.1, 1.2, 1.3, 2.1, 2.2, 2.3, 3.1, 3.2, 3.3,, 4.1, 4.2, 4.3,, 8.1, 8.2, 8.3, 12.1, 12.2, 12.3, 16.1, 16.2, 16.3, 15.1, 15.2, 15.3, ......... 10.1, 10.2, 10.3

Is it more clear?

Yes it is. Thanks for clarifying this. I didn't notice the selection order of the master fixtures, which truly makes the selection a bit tricky :)

+1
Would be great if you could use a group palette as the master/template for other compound fixtures.