Console power requirements

These are compliance numbers.

The H4 uses a supply with a max power draw of 300W. We do not draw 300W.
The RH4 and FB4 both use supplies with a max power draw of 500W. We do not draw 500W.

Thank you Paul.
So what should I allow for when choosing a UPS? And how much for a DP?

Leggy.

I tend to error on the side of caution, so if it were me, I would use the written spec as a guide so I have some cushion. 200w for DP8K.

Hope this helps.

I'm running my to DPs (2pcs) on a APC 1200 RS UPS. Info panel says that currently they are drawing 60W@230V

Thanks guys.
We did a test the other day and the Hog 4 was drawing 110w. I'm going to allow 150w per console, plus two DPs, and I have an 850w UPS so all is good.