Wholehog® Expansion Wing

ChrislimChrislim Registered User
Hi to All

Sorry to bother
Can anyone pls advise me on the following
I just got hold of my Wholehog® Expansion Wing today
When I connect the Expansion Wing to HOG 3
I realize that the Bottom Left LCD is not working
Can I change the Brightness of the LCD from HOG 3 ?
The Cuelist on the Top Left & Top Right how would anyone use it ?
I am going to put cuelist that like Effect , Color , Beam would that be good ?

Attach is the Expansion Wing Setting on HOG 3


  • bradpepebradpepe Registered User, HES Alumni
    edited May 2010

    Have you configured all four portions of the wing in the control panel/wings section? Here you need to assign the four areas to different playback bars.

    As for the top button, these are great for all types of things. I have used them for color bumps, fogger controls, house lights... use your imagination....

    You can adjust the contrast, backlight, etc on the wing by holding down PIG+ENABLE on the wing. THen you can see the faders will show what you can adjust. You can learn more in section 12.6.1 of the user manual/help files.
  • Michael_GrahamMichael_Graham Registered User, Super Moderator, HES Staff
    edited May 2010

    If you hold down the PIG key and the Enable key you will be able to adjust the brightness of the screens using the faders.
  • ChrislimChrislim Registered User
    edited May 2010
    Got that thanks
    Great help

Sign In or Register to comment.