Strobe Question

bigboss007bigboss007 Registered User
Hy!
i have a simple question about the strobe programming!

i have 4x martin atomic on a cuelist - when i press the flash-button all other fixtures and generics should be dark...

How is this doable?

pls. describe me the way as simple as possible!
big thx!

Comments

  • MLorenzMLorenz Registered User, Hog Beta
    edited March 2010
    in the Cuelistoptions of your Strobe-Cuelist chose the Master-Section

    for the Flashbutton select "+ Go on Flash" "+ Release on off" and the "Solo" option

    Thats it.
    Check your Fadetimes of the cue...
    To start direct strobing when you press the flashbutton the Fadetime must be set to 0 sec, also I would set the releasetime to 0 sec
  • ShrunkenNedShrunkenNed Registered User, Hog Beta
    edited March 2010
    Hog 3-

    In the Cuelist window, press the 'Options' softkey in the top toolbar.
    In the left sidebar, select 'Master' under CONTROLS.
    Here you can adjust the settings for the Cuelist buttons. For the 'Click' button (bottom button) make sure 'Flash' is selected in the pulldown. The click on 'Solo' so that it is selected.
    Solo makes whatever is recorded in that particular Cuelist live, and anything that is not in the cuelist receives an intensity of 0%.
  • bigboss007bigboss007 Registered User
    edited March 2010
    big thx gentleman ;-)
  • MLorenzMLorenz Registered User, Hog Beta
    edited March 2010
    My pleasure:

    Kurz auf deutsch:

    Du bist in Österreich, PreWorks als österreichischer Vertrieb ist auch immer nen guter Ansprechpartner bei Fragen.
    Andreas macht da nen guten Support
  • bigboss007bigboss007 Registered User
    edited March 2010
    danke, kenn natürlich den hr. reinbacher eh, aber bei so kleinen fragen bemühe ich das forum ;-)
Sign In or Register to comment.