Yet another _lib file help request

jadetuplinjadetuplin Registered User
I am making new fixture files, and cannot get them to work with my board.
They will work on my PC, and work well. But the board says "this file is not compatible with this software version" and then pops up an error, about how the fixture was not found.

I've tried everything on the Internet and in the manual, but nothing seems to work.

Any help is appreciated.

Thanks!

version = 40
count = 3

//-------------------------------------------------------

fixture = Led38
manufacturer = 99
product = 100
name = Chauvet ledrain
yoke = no

output = dmx

parameter = Red
default = 0
highlight = 0
crossfade = 0
type = ltp8bit
range = 0, 255, %, noauto

parameter = Green
default = 0
highlight = 0
crossfade = 0
type = ltp8bit
range = 0, 255, %, noauto

parameter = Blue
default = 0
highlight = 0
crossfade = 0
type = ltp8bit
range = 0, 255, %, noauto

parameter = Colour mac
default = 0
highlight = 0
crossfade = 0
type = ltp8bit
range = 0, 7, off, noauto
range = 8, 15, 1, noauto
range = 16, 23, 2, noauto
range = 24, 31, 3, noauto
range = 32, 39, 4, noauto
range = 40, 47, 5, noauto
range = 48, 55, 6, noauto
range = 56, 63, 7, noauto
range = 64, 71, 8, noauto
range = 72, 79, 9, noauto
range = 80, 87, 10, noauto
range = 88, 95, 11, noauto
range = 96, 103, 12, noauto
range = 104, 111, 13, noauto
range = 112, 119, 14, noauto
range = 120, 127, 15, noauto
range = 128, 135, 16, noauto
range = 136, 143, 17, noauto
range = 144, 151, 18, noauto
range = 152, 159, 19, noauto
range = 160, 167, 20, noauto
range = 168, 175, 21, noauto
range = 176, 183, 22, noauto
range = 184, 191, 23, noauto
range = 192, 199, 24, noauto
range = 200, 207, 25, noauto
range = 208, 215, 26, noauto
range = 216, 223, 27, noauto
range = 224, 231, 28, noauto
range = 232, 239, 29, noauto
range = 240, 247, 30, noauto
range = 247, 255, 31, noauto

parameter = Strobe
default = 0
highlight = 0
crossfade = 0
type = ltp8bit
range = 0, 255, %, noauto

parameter = Preset pro
default = 0
highlight = 0
crossfade = 0
type = ltp8bit
range = 0, 127, none, noauto
range = 128, 159, fade, noauto
range = 160, 223, cc 1, noauto
range = 224, 255, cc 2, noauto

parameter = Dimmer
default = 0
highlight = 0
crossfade = 0
type = ltp8bit
range = 0, 255, %, noauto

//-------------------------------------------------------

fixture = Scanner
manufacturer = 99
product = 99
name = Scanner 250
yoke = no

output = dmx

parameter = Gobo
default = 0
highlight = 0
crossfade = 1
type = ltp8bit
range = 0, 9, shutter, noauto
range = 10, 19, open, noauto
range = 20, 29, globe, noauto
range = 30, 39, 3x3 box, noauto
range = 40, 49, spi cir, noauto
range = 50, 59, tri cir, noauto
range = 60, 69, star, noauto
range = 70, 79, letters, noauto
range = 80, 89, splots, noauto
range = 90, 99, dots, noauto
range = 100, 109, line, noauto
range = 110, 119, 4 leaf, noauto
range = 120, 129, dot cir, noauto
range = 130, 139, unknown, noauto
range = 140, 149, triangel, noauto
range = 150, 159, rot s-f, noauto
range = 209, 255, strobe, noauto

parameter = Colour
default = 0
highlight = 0
crossfade = 0
type = ltp8bit
range = 0, 9, shutter, noauto
range = 10, 19, white, noauto
range = 20, 29, red, noauto
range = 30, 39, dk green, noauto
range = 40, 49, yellow, noauto
range = 50, 59, green, noauto
range = 60, 69, orange, noauto
range = 70, 79, lt blue, noauto
range = 80, 89, dk blue, noauto
range = 90, 99, pink, noauto
range = 100, 109, r w o, noauto
range = 110, 119, gren yel, noauto
range = 120, 129, b w g, noauto
range = 130, 139, p w b, noauto
range = 140, 149, wh gren, noauto
range = 150, 159, 4 color, noauto
range = 200, 255, 4 color, noauto

parameter = Pan
default = 0
highlight = 0
crossfade = 0
type = ltp8bit
range = 0, 255, noauto

parameter = Tilt
default = 0
highlight = 0
crossfade = 0
type = ltp8bit
range = 0, 255, noauto

//-------------------------------------------------------

fixture = Led200b
manufacturer = 99
product = 101
name = Chauvet led spl
yoke = no

output = dmx

parameter = Control
default = 0
highlight = 0
crossfade = 0
type = ltp8bit
range = 0, 29, rgb ctrl, noauto
range = 30, 59, strobeup, noauto
range = 60, 119, strobedn, noauto
range = 120, 149, colormac, noauto
range = 150, 179, rgbchase, noauto
range = 180, 209, auto, noauto
range = 210, 239, autofade, noauto
range = 240, 255, sound, noauto

parameter = Red
default = 0
highlight = 0
crossfade = 0
type = ltp8bit
range = 0, 255, %, noauto

parameter = Green
default = 0
highlight = 0
crossfade = 0
type = ltp8bit
range = 0, 255, %, noauto

parameter = Blue
default = 0
highlight = 0
crossfade = 0
type = ltp8bit
range = 0, 255, %, noauto

parameter = Strobe
default = 0
highlight = 0
crossfade = 0
type = ltp8bit
range = 0, 255, %, noauto

parameter = Intensity
default = 0
highlight = 0
crossfade = 0
type = ltp8bit
range = 0, 255, %, noauto
 

Comments

  • tadawsontadawson Registered User
    edited December 2009
    Have you tried taking a show disk from your board and editing this into it? I am not sure what else is in your show, but if you are simply replacing _lib.lib and not amending to it, it could break a lot of things . . .

    That, and be sure that all your parameter types, etc. exist in the function.txt file.

    And lastly, what type of console, and what software revision are you running?

    - Tim

  • jadetuplinjadetuplin Registered User
    edited January 2010
    I found the problem, I patched my show on the PC using fixtures that did not exist on the board, I missed it because I only assumed that the fixture was there.

    Sorry, and thank you for your help.
  • tadawsontadawson Registered User
    edited January 2010
    jadetuplin;44207 said:
    I found the problem, I patched my show on the PC using fixtures that did not exist on the board, I missed it because I only assumed that the fixture was there.

    Sorry, and thank you for your help.

    Glad to hear that you got it worked through! I find on my board, that pretty much whenever you patch a fixture type, it ends up in _lib.lib . . . no matter whether it is in the rom library or not . . .

    - Tim
Sign In or Register to comment.