Showgun DMX Tables

P# 34

www.highend.com/pub/products/automated_luminaires/SHOWGUN/SHOWGUNUserManualV3-1.pdf

Hope this helps. :)

I saw that, but it doesn't give specifics .. I need an ACTUAL dmx table, with each value / definition for each channel. MA doesn't write the actual profiles (or they might or do in their sleep) -- I need to write a personality for the desk that works. AKA, what color functions do what, litho functions, lamp functions, led functions, shutters, etc.

Get in touch with support and/or Brad Schiller, they should be able to supply the required data.

The original single-fixture MA library for the Showgun was written by High End, but I don't know where the split library comes from.

You could also always load up H3PC with a widget or use your H3 console and look at the DMX processes window to see the values you require.

Hope this helps. :)

Stephen,

On ma-share under "SHOWGUN and SHOWGUN 2.5 Libraries" you can use the SHOWGUN Fixture and SHOWGUN Tracking Ring. These should work fine, let me know if they do not.

Thanks,

They do work better than the ones in the most recent library release. The control features still do not work (though since there is no documentation or DMX charts I can't verify that I'm even doing it right) -- Can't lamp off or reset, even when doing the typical high end shutter closed option.

Instead of just choosing "Close" under Shutter, send a value of 0. That should do the trick.

I'll give it a whirl. Thanks Zach-

You may want to try out this one!