Frozen DL.2 Fixture

RVADL2UserRVADL2User Registered User
edited December 2009 in DL.3/DL.2
Hi, I have a DL.2 fixture that's frozen and I'm not sure how to get it unfrozen. I have the ability to pan & tilt the fixture via the Road Hog console, however my global & graphics layers are totally unresponsive. Is there some sort of reset that I need to perform to resolve this issue?

Any help is appreciated.

Thanks, folks!

Comments

  • Marty PostmaMarty Postma Registered User
    edited December 2009
    Two quick things to try:

    1 - Reboot the server (either by DMX or CMA....I usually have better results with CMA in a "lockup" situation)
    2 - Set the input to "External" and then back to "Internal" in case the physical relay has gotten stuck.

    Hope this helps. :)
  • RVADL2UserRVADL2User Registered User
    edited December 2009
    You, my friend, are a GENIUS! I really appreciate your help!
  • Marty PostmaMarty Postma Registered User
    edited December 2009
    No worries! Glad you got it working properly again.
Sign In or Register to comment.