Network Issues

Hey Guys

I'm sorry if this is a double post but I didn't find anything for it.

Here's the problem:

I can not make the Hog3pc software talk to each other. Over a wired or Wireless network. I can get Hog3pc on the tablet and WYSIWYG on the desktop to talk over the wired network. Have reset everything several times. Is there a network setting on the router to change? I've tried running the server on all three of the machines but it doesn't seem to make a difference.

The Hardware: all running Hog3pc V3.0.5
-DI 524 wireless router (Using as Static DHCP Server)
-Hp TX1202ca Tablet PC(windows 7) As main console
-Acer aspire 1 Netbook (Win XP) As Focus Remote
-Desktop(Win XP Pro) As test machine

A while back i used a linksys wireless router with no issues. imagine I'm just missing something small.

Any other Info required let me know, Any and all help is greatly appreciated.

Thanks Kurtis

0 bradpepe - Former HES Forum Member over 14 years ago

Kurtis,

I suggest having a look at our tutorials on this page as they have plenty of information for networking: www.highend.com/support/training/wholehogtutorials.asp
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 kurtiswilk - Former HES Forum Member over 14 years ago

unfortunetly thoses did not help. I ran through them all, but no seemed to have any effect.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 robbie_bruce - Former HES Forum Member over 14 years ago

I would try disabling the Ethernet connection or you can go into the Hog 3 control panel->Network and ensure Hog3PC is connecting to the wireless adapter.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 kurtiswilk - Former HES Forum Member over 14 years ago

I've tried this aswell, Any other ideas? also tried uninstlling and reinstalling all three.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 barnes2000 - Former HES Forum Member over 14 years ago

Just double checking, but make sure you disable any Firewall and/or Virus protection.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 barnes2000 - Former HES Forum Member over 14 years ago

Please post your IP addresses for each component.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 barnes2000 - Former HES Forum Member over 14 years ago

Also, just checking, the PCs are, in fact connected to the router right? You have a good connection signal, but just can't get HogPC to find the server?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 kurtiswilk - Former HES Forum Member over 14 years ago

- Router strength full when on wireless. Also tried with both hardwierd: No luck
- firewalls and antiviruse fully disabled: No luck
Ip address(all static): Netbook : 192.168.0.102
Tablet : 192.168.0.103
Desktop: 192.168.0.101

You are correct is this:
"Also, just checking, the PCs are, in fact connected to the router right? You have a good connection signal, but just can't get HogPC to find the server? "

Kurt
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 kurtiswilk - Former HES Forum Member over 14 years ago

also have tried running all three as the server
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 kurtiswilk - Former HES Forum Member over 14 years ago

Also all three have a diffrent console number
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 barnes2000 - Former HES Forum Member over 14 years ago

And once again, just checking the obvious, the server button is enaged only on the server console, and not on the clients?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 joshua thatcher over 14 years ago

Some other settings to consider. You probably have just trying to narrow every little thing down.

---The port numbers are all the same
---Control panel network box-Set to "use custom ip settings" and that you are only using the "enable boot server only"
---That the clients are unchecked as far as running as server
---Try without s router-maybe a hubor switch that is simple.

Also when you open your windows network properties general tab what do you see checked or unchecked?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 joshua thatcher over 14 years ago

Also make sure that the subnet masks match as well. They shgould be the same
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 kurtiswilk - Former HES Forum Member over 14 years ago

[quote=jthatcher;42394]Some other settings to consider. You probably have just trying to narrow every little thing down.

---The port numbers are all the same Yes 6600
---Control panel network box-Set to "use custom ip settings" and that you are only using the "enable boot server only" Correct
---That the clients are unchecked as far as running as server Correct
---Try without s router-maybe a hubor switch that is simple. I will dig one out

Also when you open your windows network properties general tab what do you see checked or unchecked?

Also all subnet masks are the same

**took a screen shot of checked to be easier then listing***
Kurt
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 kurtiswilk - Former HES Forum Member over 14 years ago

Please keep in mind that I am currently (as I type) conntrolling WIG R22 on the desktop from Hog3 on the tablet
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel