W3 Hardware Problem?

dollerdoller Registered User
We have a Hog 3 from 2003 .in the last time theydo not function the flash buttons and the number block properly.i must press several timesto that feels reacted.
is it possible to change the number block?

greeds dol:hogsign:


  • Marty PostmaMarty Postma Registered User
    edited September 2009
    It seems like you are seeing a hardware problem.

    The first things I would check for are the internal wiring harness connections at both ends to be sure that everything is snug, and no wires are damaged.

    The secong thing I would try is removing the key-caps and see if the problem persists. If it does, you will need to send the console in for service as you probably have broken keys.

    The flash-keys will wear out over time, especially on the older H3 desks as they have the older type of spring mechanism (there was a small change to the type of key used somewhere around 2005 or 2006....whenever it was that the Full Expansion wing came out....that made the keys more durable....the older ones have a "softer" feel to them)

    So if you have broken flash-keys you should also seek service for your desk.

    Contact support @ +1 (800) 890-8989
Sign In or Register to comment.