Cyber dimmers . . .

tadawsontadawson Registered User
edited August 2009 in HES Automated Lighting
Just got a couple of pristine Cyber-SV units into my world, and have really only one issue to deal with, which should be trivial. One unit leaks a bit of light with the dimmer at zero . . . . is there a hub adjustment procedure for a Cyber, or something specific I should look for in this unit? I would imagine that this would be a pretty common PM type of issue . . . .

Thanks,

- Tim

Comments

  • Marty PostmaMarty Postma Registered User, DL Beta, Hog Beta
    edited July 2009
    It does sound like you need to do a hub setup.

    Out of curiosity are you using the personality switches 1&2 together for smoother dimming?
  • tadawsontadawson Registered User
    edited July 2009
    Marty Postma;39840 said:
    It does sound like you need to do a hub setup.

    Out of curiosity are you using the personality switches 1&2 together for smoother dimming?
    Can't say that I have seen any docs that discuss running 1&2 together, so I guess that would be a no . . . can you elaborate on what feature that enables? Also, might anyone have any poop on doing a hub setup? It would seem that switch 2 would strike, and switch one would cause everything to self-test and be in motion. Do you just power it up with no DMX, let it home and the dimmer close, and setup from there or ? ? ? ?

    - Tim
  • Marty PostmaMarty Postma Registered User, DL Beta, Hog Beta
    edited August 2009
    Hey Tim,

    Sorry for the delay......lots of travel lately.

    Pers 1+2 together will enable smoother dimming on the Cybers.

    I've always done my hub setups on Cybers with no DMX and Pers-2 on as this takes all the flags to their homing stops, wheels in open positions, etc.

    Hope this helps. :)
Sign In or Register to comment.