DIFFICULTIES TO LOAD 2.6.0 SHOW

roberto_novelliroberto_novelli Registered User
hello every one, what is the good way to load an 2.6.0 show into 3.0.2
release?
My customer have a show did with 3 x Dp2000 using 2.6.0 wholehog III
and the load into 3.0.2 wholehog III with 1 x dp8000+ 1 x dp2000,is not automatically,there is a lost patch and no dmx working.
Please every support is wellcome.

thanks.

Comments

  • Joe BleasdaleJoe Bleasdale Registered User
    edited April 2009
    You need to convert 2 of the DP2ks to 1 DP8k. As for loading the show, what problems are you seeing..? (If any). Shows should be compatible between versions to my knowledge. Also check the 2.6.0 show for errors using the checker in the show manager. This will see if the showfile has any corruption.

    Let us know. Regards,
  • Marty PostmaMarty Postma Registered User
    edited April 2009
    My customer have a show did with 3 x Dp2000 using 2.6.0 wholehog III
    and the load into 3.0.2 wholehog III with 1 x dp8000+ 1 x dp2000,is not automatically,there is a lost patch and no dmx working.




    You need to Clone the patch information over to the new DP in this case, because the show is looking for DP-2000 and you are now using DP-8000.....the conversion is not automatic as they are different products with very different feature.

    Hope this helps. :)
  • bradpepebradpepe Registered User, HES Alumni
    edited April 2009
    Roberto,

    Marty and Joe are correct. To help you with the cloning of patch information, watch this training video:
    http://www.highend.com/support/training/Files/Video_8-CloningDMXP/clonedp.html
Sign In or Register to comment.