Chase FX

lightismagiclightismagic Registered User
Sorry if this has been asked before:
What is the nearest match for the "chase" effect table of a GrandMA? I have to program a lot of different chase fx with a lot of low voltage bulbs, so do it with cuelists and single cue would be a pretty time consuming way...

kind regards
Tommi Bernhardt

Comments

  • Marty PostmaMarty Postma Registered User
    edited March 2009
    You are probably looking for the "Step" table.

    Hope this helps. :)
  • xpresslightingxpresslighting Registered User
    edited March 2009
    try "Mark on" and Ramp efx as well.
  • lightismagiclightismagic Registered User
    edited March 2009
    Thanks guys, I will give it a try.

    kind regards
    Tommi Bernhardt
  • bellonsbellons Registered User, Hog Beta
    edited March 2009
    well to achieve the chase MA effect use the step table and work with the effect lenght as well. Set your lenght to around 20 percent. Obviously number of fixtures being in the effect is quite important to figure out which level your lenght should be set at. Just remember you can't achieve the same chase MA effect if you don't play around with lenght as well.
    Hope this helps
  • lightismagiclightismagic Registered User
    edited April 2009
    Yep, this will come close enough...
    Thanks for your help, guys
Sign In or Register to comment.