playback bar

dollerdoller Registered User
hi ,
i have wholehog 3 with 3.0.1,1dp2k and 1 Playbackwing,
i have a display over the wing .when i bring the playback bar on display it is ok.when i will slide the bar smaller for the faders.i can not click on ricght and slide it.bevor 3.0 it was ok?

greeds dol:hogsign:

Comments

  • cmuenchowcmuenchow Registered User, Administrator, HES Staff
    edited March 2009
    What are you trying to right click and slide? The whole playback bar?
  • dollerdoller Registered User
    edited March 2009
    no ,
    the faderwing is smaller as the playbackbar in the display.
    i will the same size.
    i wiull the foe example the list for fader 9 over the choosemaster nine not over 10 because the playback bar is to large.
  • Joe BleasdaleJoe Bleasdale Registered User
    edited March 2009
    I think I understand. You want to reduce the width of the bar because you cant see fader 10's bar?
  • dollerdoller Registered User
    edited March 2009
    yes joe . bevor 3.0 it was no problem and very great?
  • Joe BleasdaleJoe Bleasdale Registered User
    edited March 2009
    Have you tried calibrating the screen? Also, if your screen has an "auto adjust" feature try that. Aswell as the manual screen adjustment settings.
  • dollerdoller Registered User
    edited March 2009
    no ,it was possible befor 3.0 the bar in the external dscreen left side click and slide smaller and than was the cuelist exatly over the coose faders??
    greeds
  • bradpepebradpepe Registered User, HES Alumni
    edited March 2009
    Dol,

    I am still a bit confused by what you are seeing.. can you please provide a screen shot or photo?

    thanks,
  • dollerdoller Registered User
    edited March 2009
    hi Brad,
    when i have a wing conected and a external screen ,and the screeen is behind the wing .
    wi bring the playbackbar 2 for the wing to the extern screen.
    for example on hog cuelist 1-10 is on fader 1-10 and the the lists exaktally over the choosebutton on the screen.
    on the second playback bar the screen is to large.
    the cuelists for the fader 11 is not over the choose button it is minimal leftside.over the next button from the wing is a cuelist.
    before 3.0 you can click on the extern screen on left side from the bar and you can slidrto right side and the bar was smaller,not slide the bar from screen to sreen.

    i hope i can in next time load a older version and make a photo.

    dol
  • bradpepebradpepe Registered User, HES Alumni
    edited March 2009
    Dol,

    I have not seen this problem on Road Hog Full Boar with Road Hog wings that I have been using recently. I will have to have a look with a Wholehog 3 console. What wing type are you using?

    thanks for the updated information,
  • dollerdoller Registered User
    edited March 2009
    hi,wholehog 3with 1x dp2k and 1x miniwing,1x extern tft display.

    dol
  • Michael_GrahamMichael_Graham Registered User, Super Moderator, HES Staff
    edited March 2009
    Dol

    You are saying on 2.6.0 you were able to move the 2nd playback bar to an external monitor and then 'shrink' the playback bar to fit over the choose buttons on an external wing?
  • dollerdoller Registered User
    edited March 2009
    yes,it was 2.6 or older..
    it was great foe work with miniwing.
    dol
  • leebotleebot Registered User
    edited March 2009
    I haven't had any problems shrinking the playback bar on my laptop. Slowly move the mouse from left to right over the far left master. When the pointer changes to a <-> looking arrow left click and drag your mouse to the right. That will keep it docked at the bottom of the screen and shrink it to fit.
  • dollerdoller Registered User
    edited March 2009
    hi lee,
    and on a hog 3 too??

    dol
  • Joe BleasdaleJoe Bleasdale Registered User
    edited March 2009
    Do you use the trackball or or an extrenal mouse with the Hog 3 Doller?
  • Michael_GrahamMichael_Graham Registered User, Super Moderator, HES Staff
    edited March 2009
    Doller

    Are you still having this problem?
    I am able to 'shrink' the playback bar on an external monitor using the trackball.
    I am testing this on a Hog 3 with the external monitors set to 1282x1024 75hz.
  • dollerdoller Registered User
    edited March 2009
    hi joe ,it was mit trackball.
    yes i have the problem.
    With witch version 3.0.1??
    i check this with the monitor.
    dol
  • Michael_GrahamMichael_Graham Registered User, Super Moderator, HES Staff
    edited March 2009
    Dollar

    Yes I was testing on a Hog 3 running ver 3.0.1 b2425.
    I had 1 exernal monitor hooked at res. 1280x1024 75hz.
    I moved the playback bar to the external monitor and was able to 'shrink' it.
  • dollerdoller Registered User
    edited March 2009
    hi have check this and it was no shrink from left to right .
    the bar make greater pull it up it no problem.
    i have update to 3.0.2
    i have check with many displays extern.

    ???

    greeds
Sign In or Register to comment.