› ›

Strobe Parameters Missing?

drathbundrathbun Registered User
edited January 2009 in Wholehog 3 General Discussion
Before this version of WholeHog3PC I could patch and use my Varilite 2500 Spot's strobe features from the Beam palette on the rotaries. I would press Beam until the strobe features were mapped to a rotary and then dial in the strobe function I wanted. Now the strobe button only pops up OPEN and CLOSED.

Am I patched wrong? Is something different?

Comments

  • SfeerPeerSfeerPeer Registered User
    edited January 2009
    strobe for my moving heads is now in the position window, on the 4th wheel....
  • Joe BleasdaleJoe Bleasdale Registered User
    edited January 2009
    SfeerPeer wrote:
    strobe for my moving heads is now in the position window, on the 4th wheel....

    Yes. However if this is unsuitable for you, wheelsets can be altered to suit your needs under user preferences.
  • jxgriffijxgriffi Registered User, DL Beta, Hog Beta
    edited January 2009
    Strobe for my VL2000's is mapped to the Intensity page...but that's because I mapped it there. :poke:

    Check your encoder mapping...it might be simple enough to remap it to where you'd expect it.
Sign In or Register to comment.