how to connect the wholehog3 with wysiwyg22

pebistonepebistone Registered User
i would like to connect the wholehog 3 with wysiwyg 22
i used a hub
i connect the wholehog 3 and my pc on the hub
and after , i don't know what configuration for wholehog 3 and pc used
please help

Comments

  • Marty PostmaMarty Postma Registered User
    edited January 2009
    Make sure that you have the Connectivity Driver installed.

    Also make sure you have added a DP in WYG and that the patch in the Hog console matches the patch in WYG.

    Then launch your show on the console, and after it is loaded, launch WYG and open your file.

    There is much more info on this in both the Hog manual and the WYG help tab.

    Hope this helps:)
  • pebistonepebistone Registered User
    edited January 2009
    hog3pc with wyg22 , it's ok,no problem
    i want to connect the console wholehog 3 with my pc (with wyg22)
    ????
    how to do this
    thanks for your helps
  • Marty PostmaMarty Postma Registered User
    edited January 2009
    You connect in exactly the same way, just substitute the console for the H3PC app.

    As far as physical connections go, either run a crossover cable directly between the console and your computer, or use straight cables and and ethernet switch to connect everything.

    Hope this helps:)
Sign In or Register to comment.