700HX Intellabeam repair help please

Mack ManMack Man Registered User
edited July 2008 in HES Automated Lighting
Hi all,

I am running a Laser Show and we have 18 700HX's hooked up. About half of them do not work or work poorly, I am looking for someone that is familiar with repairing basic problems with them. I have 7 spare units to cannibalize and boxes of new and used parts. I spent about three hours working on them this morning and got 4 more working and a couple more may just need new bulbs which I have tons of, just little time to install them so far. I am a volunteer and know very little about them. I do have the manuals. One lights up then turns it’s self off, I found a loose connection to the bulb that had pitted so I replaced it, but it still shuts it’s self off after 5 or so seconds. Two others overheated because I did not know their vents had been plugged for the winter, I replaced both fuse housings as they were melted, but the lights still do not work, I will check the bulbs when I get a chance. I also have a few 1200’s, all but one works I think.

Anyone out there a 700HX guru?

TIA

Comments

  • Marty PostmaMarty Postma Registered User, DL Beta, Hog Beta
    edited July 2008
    contact LightParts....they will be most helpful.

    www.lightparts.com
  • PuffyfishPuffyfish Registered User
    edited July 2008
    Marty Postma said:
    contact LightParts....they will be most helpful.

    www.lightparts.com

    Yup! Ask for Don. When it comes to the HX700 he is Uber Guru Yoda master.:headbang:
  • Mack ManMack Man Registered User
    edited July 2008
    Thanks all, I did all Don, what a nice guy! Working on them now.

    Thanks again,

    Mack Man
Sign In or Register to comment.