Studio Spot 250 IRIS

bcarterbcarter Registered User
edited May 2008 in HES Automated Lighting
My 4 Studio Spot 250s have a variety of beam sizes when the iris is fully closed and in focus. Why is this?
All motors seem to be working normally. The beams are the same size with the iris fully open and in focus.

Comments

  • jeeperjeeper Registered User
    edited May 2008
    my do it to?
  • Woodj32177Woodj32177 Registered User, DL Beta, Hog Beta
    edited May 2008
    my guess is that you need to do a hub setup.

    in the menu, go to test, then S/UP

    All the motors will lock in position,

    loosen the collar for the iris, and manually move the iris to the homing position and then with the iris against its home stop, retighten the collar.

    press the menu button and the fixture will rehome.
    and hopefully the iris's will all be the same size.

    this works with shutters as well. when fixture don't dim at the same rate it almost always is a hub issue.

    Good Luck!
    Joshua Wood
  • jeeperjeeper Registered User
    edited May 2008
    Cool! I knew about this but have never tried it, also on the iris what is the the home pos. cause when I watch the fixture homing it opens and closes?
  • Woodj32177Woodj32177 Registered User, DL Beta, Hog Beta
    edited May 2008
    I will be honest I don't remember off the top of my head,
    whichever one it tries to go past when it homes...
    probably the first one.
    if that doesn't work, try the other one.
    Good Luck!
    Joshua Wood
  • Michael_GrahamMichael_Graham Registered User, Administrator, HES Staff, Hog Beta
    edited May 2008
    When homing the Studio Spot 250 iris make sure it is in the closed position.
  • Michael_GrahamMichael_Graham Registered User, Administrator, HES Staff, Hog Beta
    edited May 2008
    When homing the Studio Spot 250 iris make sure it is in the closed position.
Sign In or Register to comment.