Midi keyboard cues?

jayhergen2jayhergen2 Registered User
Is there anyway that I can plug in my Midi Keyboard and by hitting a key tell the hog to run a specific cue on the console. I have been able to run a fader, but I have not been able to find a way to run a specific cue. Thanks, James

Comments

  • Marty PostmaMarty Postma Registered User
    edited March 2008
    You need to be able to send the proper MSC command via the keyboard.
  • cmuenchowcmuenchow Registered User, Administrator, HES Staff
    edited March 2008
    Unlike Hog 2 the Wholehog 3 software does not recognize midi notes. However, depending on the midi keyboard software you are running, you should be able to map midi notes to send specific system exclusive midi commands. There is more on this in sysex commands in the "Audio Visual Control Solutions for Wholehog Software" tech note which is on the FPS website.
  • ChrisTallChrisTall Registered User, DL Beta
    edited March 2008
    Sure,

    If the keyboard can't be programmed to send MSC (or System Exclusive messgaes), then buy a device that maps the notes to MSC.

    I have used this and it worked great.
    http://www.midisolutions.com/prodepp.htm

    About $200

    Cat
  • adrienbouffletadrienboufflet Registered User
    edited August 2010
    hey there everyone.
    i can see that i am not the only one here trying to connect a midi/ usb keyboard to the hog3. i have been searching around every forums but can't seem to find the right answers. If i have properly understood, james was able to run a fader? how? i have a Akai mpk 49 and a super widget. i would like to be able to assign the keyboard as a controller for when i'm out on small Gig's. I met a guy who had done so with his MA PC. worked fine. And found it quite useful. if any one has the solution i would be very thankful.
  • ChrisTallChrisTall Registered User, DL Beta
    edited August 2010
    Adrien,

    We still use the Event Processor.
    http://www.midisolutions.com/prodepp.htm

    It goes between the keyboards MIDI Out and the HOG III Midi in.

    With the supplied software you program it to replace incoming MIDI Notes with SysEx messages.

    SysEx Messages are like


    SysEx is also referred to as MSC (Midi Show Control)
Sign In or Register to comment.