(1949)Bug Report: IFCB don't recall values after clear

I tried this with HogPc 2.3.2 with one desk channel and indeed if value is in release state it doesn't take value after clear.

Also I noticed this kind of thing.

Record one cue with one desk channel at full.

Change fader to IPCB and put it at full and then at zero

Change fader to I fader and press play. Intensity goes to full, but fader is at zero and in I fader mode.

Thanks Sami.

I will get this all logged or check if it is already logged.

So there are two bugs?

Yeah I think so, changing between IPCB and I fader doesn't work quite as expected + the bug you found.

iPC (1932)

I was also playing with IPCB the other day and was getting some behavior I was not expecting (although I must qualify this as being the first time I've tried out IPCB and there may have been programmer error.)

1) on an Intensity fader I have a couple Mac250 Entours @ full

2) on an IPCB fader (cuelist) I have strobe @ 4Hz Random for the Macs

3) as I move up IPCB fader up from 0%, the lights start strobing randomly but it is immediately at the 4Hz rate: there is no noticable change as fader increases (despite my output window indicating a change in strobe rate as expected given fader position)

4) after reaching 100% on the IPCB fader and start bringing it down, strobe is no longer random but synchronized across fixtures. Output window confirms this as no longer listing "random" output. Strobe rate from instruments remains at 4Hz regardless of fader position although output window indicates a changing strobe rate.

So is this a bug, or did I am doing something wrong, or is this expected behavior?

Thanks.