vista

While it isn't officially supported.....I have used the last several versions of CMA successfully on VISTA machines.

Hey guys, I'm using a T2 vista with 2 DL2s. I can not get the svideo input to work. I can get them camera to work but not the svideo. Any help?

We were actually talking about MS Windows Vista....not Jands;)

But to to get the s-video input to work do the following.

Set MOTION to zero (closing the iris)
Set Control from Capture to S-video (DMX 230)
Wait for about 10 sec for the relay to click over, then release the channels.

Your DL.2 will now take S-video in vs its' own camera.

Hope this helps:)