Problem with XPe Image 8.0.6

I also also have the same problem.

Mike and Andrew,

Can you please post here or email me directly the serial number of your consoles? This might be something specific to the motherboard and the serial number would help. We did not see this in any of our testing on all the models, but you guys have the problem so we are curious.

If you need to get your desks running, I suggest installing the previous image and upgrading the Hog 3PC and Hog iPC config panel.

thanks for your understanding,

I had also the same problem on the iPC of our company.

I also also have the same problem.

I will get back to you with the Serial Number and such when we open tomorrow. I have already started a dialogue with Mitch about this.

We are aware of the problem and it affects certain generations of motherboards. We are working to create a patch as soon as possible for this problem. We believe it is due to a change in the Hog iPC config panel application.

Thank you for your understanding and patience,