F-100 Fog Generator

Mr. azarMr. azar Registered User
edited November 2007 in HES Automated Lighting
Heater seems to be not working. Any ideas?

Comments

  • Marty PostmaMarty Postma Registered User
    edited November 2007
    check the thermal breaker on the side of the heater.
  • Mr. azarMr. azar Registered User
    edited November 2007
    i found that fuse 2 is blown. is that maybe the cause of it?
  • Mr. azarMr. azar Registered User
    edited November 2007
    I put in a new fuse and when powered up, it blew instantly. :1zhelp:
  • PuffyfishPuffyfish Registered User
    edited November 2007
    Smells like what could be a toasty heater. You did push in on the thermo-fuse didnt you?:cool:
  • Mr. azarMr. azar Registered User
    edited November 2007
    Yes I did. Hmmm so a new heater must be ordered? Is there anything else that I can maybe look at? Maybe somewhere electronic?
  • Mr. azarMr. azar Registered User
    edited November 2007
    chris_litz wrote:
    It's probably a bad transformer on the board or it could be the bridge rectifier.

    Hi Chris,

    Are the parts you mentioned on the main board? Where is the Bridge rectifier located?

    Thanks Chris :D
  • Mr. azarMr. azar Registered User
    edited November 2007
    nevermind ty :D

    But, whats the part number for both the transformer and the brifge rectifier. I can't seem to make it out on the board.
Sign In or Register to comment.