Just used my cybers -n- my wonderful cyber LCD for yet another performance of THE NUTCRACKER, i must say i was getting compliments from everybody about the lighting, and i must attribute it to these "2 little fixtures that could." well not really little but i love them anyway. THANK YOU to everyone who helped my get this sensor back working. it was really an easy job if you have the right tools and the right help, thanks again and happy holidays to everyone!!!
P.S. if anyone is looking to donate some of anything lighting... i'd be glad to take it off of your hands!!! (think tax right-off!!!)
Can anyone help me... i can't shutdown my cyberlights from my hog iPC, I've been selecting the group "cyberlights" then "intensity at 0%" then "Beam>control>shutdown" and they remain "on". I'm not a very experience light guy, maybe i need to do something else. any help would be highly aappreciated. thanks
Hi Rafael! There is a sequence that has to followed in order to either shut the lamps off or reset the fixtures. Here it is from the manual:
In order to access the control channel (channel 20 in 20-channel DMX modes 1 and 2 and channel 15 in 15- channel DMX mode 3), you must follow the procedure below: 1. Put the dim channel and the control channel at full. 2. Put the dim channel at zero and the control channel at full. 3. (Must occur within 3 seconds): Put the dim channel at zero. Put the control channel at: 25% for home or 50% for shutdown. 4. Hold for an additional 3 seconds.
