Toggle navigation
Home
Categories
Discussions
Activity
Register
Sign In
The High End Systems Forums will merge with the
ETC Community Forums
on September 27th, 2022. In order to keep your post history associated with your account, please
link it to an ETC One account.
Home
›
Digital Lighting
›
DL.3/DL.2
com error
stef
Registered User
October 2007
edited October 2007
in
DL.3/DL.2
Hi every one
I have a message on DL2
COM ERROR
and the projector is cooling
Do you this problem
Is it a cable disconnected inside ?*
I am show tonight,
Please help me :1zhelp:
Thank's
Stef
Comments
Marty Postma
Registered User
October 2007
edited October 2007
Does your error say "Camera" or "Projector" before the Com Error? Sounds like Projector from your description.
Definitely check all the connections inside the projector head (at the back of the projector, and underneath at the head-card).
If that does not fix it check the connectors on the box-card and the computer, but this is lesss likely the issue.
If you see "Camera" then check the small white ribbon cable between the camera and the head-card.
Hope this helps.:)
Sign In
or
Register
to comment.
Comments
Definitely check all the connections inside the projector head (at the back of the projector, and underneath at the head-card).
If that does not fix it check the connectors on the box-card and the computer, but this is lesss likely the issue.
If you see "Camera" then check the small white ribbon cable between the camera and the head-card.
Hope this helps.:)