effect editing in cuelist.

stue austue au Registered User
it would be a great feature when playing back a cue that has an effect to be able to alter the pan tilt directly during the show instead of using the editor as currently if you select the fixtures and adjust the value the effect stops and there is just an output for the pan and tilt value.


  • amir877amir877 Registered User, Hog Beta
    edited July 2007
    Use "Suck"

    1) All Mac's on Efx from PlayBack
    2) select the Mac's and press "Suck"

    Now you can play with the "Base value" of the Pan & Tilt during the show without stop the Efx.

  • stue austue au Registered User
    edited July 2007
    thanks Amir i didnt even think of using the suck feature. ill give it a go
  • teericksonteerickson Registered User, HES Alumni
    edited July 2007

    Amir is correct. Once the effect is in the programmer, you can easily adjust the base value. You can use suck or touch to grab the effect from on-stage. You can hold the Touch key and then touch either the pan and tilt encoders or the Position hard key to grab just the position and effect data.

    I hope this helps.
Sign In or Register to comment.