x-spot question

TimMillerTimMiller Registered User
edited May 2007 in HES Automated Lighting
I have currently become part owner of a company I used to work for. About a year ago their warehouse caught on fire and some kid who had no idea what he was doing tried to repair some x-spots (i finally got the rest of everything else he screwed up working). But there is one x-spot that thinks its an xtreme but itsnt. For the life of me I cannot remember how to tell the x-spot its an xtreme or not an xtreme.

Comments

  • RomanRoman Registered User
    edited May 2007
    When I remember right there was something with the srews on the phase board in the base of the fixture. You had to change the position of screw.

    Just did a quick search on my notebook but I didn't found anything.

    best luck Roman
  • TimMillerTimMiller Registered User
    edited May 2007
    i remembered it had to do with changing or removing a screw on either the 3 phase board or the CPU. But I cannot remember.
  • Woodj32177Woodj32177 Registered User
    edited May 2007
    It is the CPU board,
    if you are facing the fixture with the 3 phase card to the left and the CPU board to the right, you want to remove the screw on the Upper Right of the CPU board,
    Most Xspots have a small set screw in that hole to keep you from putting a screw in there, but Retrofits didn't always get the set screw.

    Joshua Wood
  • TimMillerTimMiller Registered User
    edited May 2007
    just out of curiosity does it hurt anything if the x-spot thinks its an xtreme but isn't?
  • Woodj32177Woodj32177 Registered User
    edited May 2007
    Good question,
    I am not sure,
    The screw may just change the display, or if it may change the way the fans run.
    OR, it may try to run the lamp power supply at 850watts, when it is only supposed to run at 700.

    Maybe Chris Litz can chime in here,
    Joshua Wood
  • Woodj32177Woodj32177 Registered User
    edited May 2007
    Thanks for the clarification chris,
    Josh
Sign In or Register to comment.