cloning

Justin,

I'ts not possible on the Hog 2 to load the parameters of one fixture in a cue and copy them to a different fixture in the programmer with a single command.

It is possible to do this on the Hog 3.

Studio Color 1 Cue 3 Color Copy To Studio Color 2 Enter

Tom probebly know a faster way hah...

Nope that's the way.

The keystrokes would be:
Fixture 1 Cue 3 Colour Copy Fixture 2 Enter

You are specifying a source fixture and cue and a destination fixture, but since there is no desination cue, scene, or palette it will be copied into the current editor, which by default is the programmer.

ok~
thanks for the info
could try out more on hog3 when i have the chance. ~

Justin,

On the Wholehog 2 OS, you can select the fixture while the cue is playing, press PIG+ACTIVE to grab its parameters. Then you can select the destination fixture and press PIG+COPY to place "clone from" on the command line. Now enter the number of the source fixture and press enter.

You can then knockout the source fixture, record only the selected, fixture, or do whatever else you need to do.

Of course this works with multiple fixtures as well.

I hope this helps,