Light Converse - Can you create a time code with the Hog 4 PC and Lighting Converses

You can simulate time code in Hog 4 PC to achieve this. Unless other programs need to be aware of the timecode, I think this is the easiest.

To simulate timecode:
1. Open the cuelist settings for the cuelist you want to be timecoded
2. Set the timecord source to console 1
3. Enable time code on the cuelist
4. Close the settings
5. In the cuelist window, select View Timecode to open the timecode toolbar
6. Select Simulate in the timecode toolbar

When ready hit Go on the toolbar. Go will start and stop the timecode. To go back to 00:00:00, then select jump and select 00:00:00.

Can you use the simulated time code with a lighting simulator like Light Converse?

Usually the lights in Light Converse are responding from triggers via Hog, so the timecode would need to go into Hog, which simulated time code works for.

If Light Converse needs the timecode also, then you need another solution. Hog 4 PC's simulated timecode only works inside Hog 4 PC.