Connection Hog 4 pc to DP8000

Guys, who could help with connection hog 4 pc to dp8000?!

Comments

  • jxgriffijxgriffi Registered User, DL Beta, Hog Beta
    You need ethernet out of the PC to the DP8000. Set your IP range and should be good to go.

    What specifically do you need help with?
  • StanRusakovStanRusakov Registered User
    I need help with settings in dp and hog pc and the order of their input if it important
  • StanRusakovStanRusakov Registered User
    I tried this option:
    Hog pc start window>settings>net number 1 and port 6600
    Control panel>hog net>use default ip address> enable DHCP server and boot server
    hog pc automatically swtch to Use custom ip settings>apply
    Dp8000(I used hognet output and the same net/port number as hog pc )>network>console>console link config>set DHCP off>set ip 172.31.0.001 and mask 255.255.0.0
    Then I connect it with ethernet of course and start new show.
    But this settings did not lead to the result.
    Devices see the network, but dp8000 displays ''connecting...'' without result((

  • jxgriffijxgriffi Registered User, DL Beta, Hog Beta
    In the DP8000, set it to DHCP "on" since you turned on the DHCP server in the console. It will then load the correct IP range.

    Or...alternatively, turn off DHCP server and set the console to 172.31.0.001 and the DP to 172.31.0.002.

Sign In or Register to comment.