Hi guys,
Firstly thank you for the recent steps forward with patch enhancements in v3.3.0. There's some great stuff available now.
I think there's another patch enhancement which could prove extremely useful, and that would be the ability to invert the patch for a selection, either across the whole selection, or for each whole number fixture.
Example, 10 x Sunstrips patched as 100 Desk channels
Fixture 1.1 start address 1
thru
Fixture 1.10 address 10
Fixture 2.1 start address 11
thru
Fixture 2.10 address 20
etc to Fixture 10.10 address 100
So, i'd like the ability to cater for selecting 1 thru 10 and reversing the patch as a whole, so Fixture 1.1 becomes address 100 and Fixture 10.10 becomes address 1.
Also, the ability to just invert the patch per whole number fixture, so Fixture 1.1 becomes address 10 and 1.10 becomes address 1. Fixture 2.1 becomes address 20 and 2.10 becomes address 11.
This is a genuine on site headache when battens are rigged backwards from how expected, and it's currently quite a long task to invert the patch on a fixture by fixture basis.
Hopefully you'll see the worth in this.
Cheers
Colin
